On Sunday 01 January 2006 12:05, Drew Tomlinson wrote: > I have MythTV 0.18.1 running with a PVR-250 card. About two months ago, > I added a pcHDTV-3000 card but still can't figure out how it get it > recognized by the OS. I'm running 2.6.13-r5 on Gentoo. At one point, > someone here told me all I had to do was select the DVB modules and > re-compile my kernel. Specifically, I've navigated to Device Drivers > ---> Multimedia devices ---> and have selected "Video for Linux" to be > compiled as a module. Under "Video For Linux" is an indented "Video for > Linux". If I select that, I'm presented with a list of video adapters. > > >From the list, I've selected "Conexant 2388x (bt878 successor) support" > > (for my PVR-250?). There is also an option labeled "DVB Support for > cx2388x based TV cards". I don't think I need that but I've tried it > both ways. > > Then back up to the "Video For Linux" main screen and I select "Digital > Video Broadcasting Devices ---> " and have these two entries in the list: > > [*] DVB For Linux > <M> DVB Core Support > > Nothing else is set. At the bottom of the list, I entered the > "Customise DVB Frontends --->" submenu and selected the following: > > <M> OR51132 based (pcHDTV HD3000 card) > > Nothing else is set. This option is only available when I don't select > "DVB Support for cx2388x based TV cards" in the "Video For Linux" > section. I've tried it both ways but no matter which, I get this output > from dmesg: > > cx88xx: disagrees about version of symbol tveeprom_hauppauge_analog > cx88xx: Unknown symbol tveeprom_hauppauge_analog > cx8800: Unknown symbol cx88_reset > cx8800: Unknown symbol cx88_call_i2c_clients > cx8800: Unknown symbol cx88_wakeup > cx8800: Unknown symbol cx88_risc_stopper > cx8800: Unknown symbol cx88_print_irqbits > cx8800: Unknown symbol cx88_set_scale > cx8800: Unknown symbol cx88_shutdown > cx8800: Unknown symbol cx88_vdev_init > cx8800: Unknown symbol cx88_core_put > cx8800: Unknown symbol cx88_audio_thread > cx8800: Unknown symbol cx88_core_irq > cx8800: Unknown symbol cx88_core_get > cx8800: Unknown symbol cx88_get_stereo > cx8800: Unknown symbol cx88_set_tvnorm > cx8800: Unknown symbol cx88_risc_buffer > cx8800: Unknown symbol cx88_set_stereo > cx8800: Unknown symbol cx88_sram_channels > cx8800: Unknown symbol cx88_set_tvaudio > cx8800: Unknown symbol cx88_sram_channel_dump > cx8800: Unknown symbol cx88_sram_channel_setup > cx8800: Unknown symbol cx88_print_ioctl > cx8800: Unknown symbol cx88_free_buffer > cx8800: Unknown symbol cx88_boards > cx8800: Unknown symbol cx88_newstation > cx88xx: disagrees about version of symbol tveeprom_hauppauge_analog > cx88xx: Unknown symbol tveeprom_hauppauge_analog > cx8802: Unknown symbol cx88_reset > cx8802: Unknown symbol cx88_wakeup > cx8802: Unknown symbol cx88_risc_stopper > cx8802: Unknown symbol cx88_print_irqbits > cx8802: Unknown symbol cx88_shutdown > cx8802: Unknown symbol cx88_core_irq > cx8802: Unknown symbol cx88_sram_channels > cx8802: Unknown symbol cx88_sram_channel_dump > cx8802: Unknown symbol cx88_sram_channel_setup > cx8802: Unknown symbol cx88_free_buffer > cx8802: Unknown symbol cx88_boards > cx8802: Unknown symbol cx88_risc_databuffer > cx88_dvb: Unknown symbol cx8802_fini_common > cx88_dvb: Unknown symbol cx88_core_put > cx88_dvb: Unknown symbol cx88_core_get > cx88_dvb: Unknown symbol cx8802_resume_common > cx88_dvb: Unknown symbol cx8802_buf_prepare > cx88_dvb: Unknown symbol cx8802_init_common > cx88_dvb: Unknown symbol cx88_free_buffer > cx88_dvb: Unknown symbol cx88_boards > cx88_dvb: Unknown symbol cx8802_buf_queue > cx88_dvb: Unknown symbol cx8802_suspend_common > > And finally, here is my 'lspci' output: > > tv init.d # lspci > 0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different > version?) (rev c1) > 0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 > (rev c1) > 0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 > (rev c1) > 0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 > (rev c1) > 0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 > (rev c1) > 0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 > (rev c1) > 0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4) > 0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) > 0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller > (rev a4) > 0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller > (rev a4) > 0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller > (rev a4) > 0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet > Controller (rev a1) > 0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge > (rev a3) > 0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) > 0000:00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev a3) > 0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire > (IEEE 1394) Controller (rev a3) > 0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) > 0000:01:06.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI > Video and Audio Decoder (rev 05) > 0000:01:06.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and > Audio Decoder [MPEG Port] (rev 05) > 0000:01:07.0 SCSI storage controller: Advanced System Products, Inc > ABP940-U2W > 0000:01:09.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03) > 0000:01:09.1 Input device controller: Creative Labs SB Audigy MIDI/Game > port (rev 03) > 0000:01:09.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port > 0000:01:0a.0 Multimedia video controller: Internext Compression Inc > iTVC16 (CX23416) MPEG-2 Encoder (rev 01) > 0000:01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112 > [SATALink/SATARaid] Serial ATA Controller (rev 02) > 0000:02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated > Fast Ethernet Controller [Tornado] (rev 40) > 0000:03:00.0 VGA compatible controller: nVidia Corporation NV18 > [GeForce4 MX 4000 AGP 8x] (rev c1) > > I am under the assumption that the HD-3000 card is one of the Multimedia > controllers listed and thus, is installed correctly. Or am I wrong? > > Thanks for any assistance. I am absolutely stuck on something that > shouldn't be this difficult, judging from the lack of current Google > hits on the subject. :) > > Thanks, > > Drew >
I was going to say you don't need to recompile kernels for this card, but then I saw your running Gentoo... anyway: http://www.penlug.org/twiki/bin/view/Main/DigitalTelevisionDVB -- Steve _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
