> On 1/2/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: >> >> Have been monitoring list for awhile and am now starting my myth >> project. >> Will have separarte back end and front end. Has anyone had this problem? >> >> Building a backend server to run mythtv. >> >> motherboard gigabyte ga-k8nf-9 >> cpu 3200+ >> 1 gig memory >> 2 ide drives and 2 sata >> video card asus n6200tc >> 1 sony dvd-rw >> 2- wintv-pvr-150mce model 1042 >> nosystem installed yet >> >> On boot-up with the 2 pvr 150 cards installed system freezes before >> POST. >> When one of the pvr card is removed system boots fine. Either card can >> be >> removed and have tried all pci slots with same results. >> > > David, > > A couple things come to mind. I would make sure to have the most > up-to-date > BIOS that is available (version F10 at the moment). If that doesn't take > care of it, you might have too small a power supply. > > I'm not running PVR150's on a Gigabyte board, nor on an NForce 4 board, so > I > can't suggest much else. I do have 2 PVR150's in a single system, but > that > system uses an ASUS P4PE motherboard (Intel i845PE chipset). > > Carl Fongheiser > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >
Carl Sorry not to have mentione ps. It is an antec 380 truepower 2, have downloaded F10, and have sent inquire to hauppauge and gigabyte. David _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
