Thanks for the reply. However, I had already performed these steps and was loading the correct module. At this point I have rolled back to ivtv 0.4.0 and the previous kernel (which *was* working) and still do not have sound.
After a suggestion from Axel Thimm, I am going to side-grade all my Myth packages from X86_64 to i386 and see what that does. Kirk korebantic wrote: > I had the same problem as you -- you can search the list for the > answer if you want more background. Here was the solution: > > So far I've been using yum to update my drivers, vs compiling from > source. You are right though, I > did have the wrong msp3400 driver loaded. From the mythTv list the > following steps were > recommended, which worked fine: > > Go into /lib/modules/$KVER/kernel/drivers/media/video and rename > msp3400.ko to msp3400.ko.orig > Next, go to /lib/modules/$KVER/updates/drivers/media/video and copy > msp3400-ivtv.ko to msp3400.ko > Run depmod -a > > Now reload the module > modprobe -r ivtv > modprobe -r msp3400 > > > > > On 1/1/06, Kirk Bocek <[EMAIL PROTECTED]> wrote: > >>Well, Joshua, that didn't do it. I rolled back to ivtv 0.4.0 and my >>previous kernel with no success. Still no sound playing back recorded >>programs that I know have sound. >> >>I'm wondering if it has something to do with updating the ATrpms mythtv >>package from -114 to -116. >> >>Kirk >> >>Joshua Frank wrote: >> >>>I had the same problem. I eventually just reinstalled ivtv 0.4.0. But if >>>you want to play with some thing interesting try this command >>> >>>ivtvctl -d /dev/video0 -q 1 >>> >>>This tells your ivtv card to use audio channel 1 instead of 0. I heard >>>that the was a problem with the drivers no selecting the correct >>>channel. Could be worth a try. >>> >>>On 12/31/05, *Kirk Bocek* <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> >>>wrote: >>> >>> I upgraded my MythTV system from ivtv 0.4.0 and kernel 2.6.13.2 >>> <http://2.6.13.2> to ivtv >>> 0.4.1 and kernel 2.6.14.4 <http://2.6.14.4> and now I get no sound >>> on my PVR-350 from >>> either live tv or recorded programs. >>> >>> Sound system is working - Xine playing DVDs and MythMusic output >>> sound fine. >>> >>> I've reset the settings in alsamixer/amixer: master and PCM to 75% >>> unmuted, CD (which the PVR-350 is plugged into) at 75%, muted and >>> set as >>> the capture source. Internal cabling has not changed from my previously >>> working ivtv 0.4.0 setup. >>> >>> The correct msp3400 is being loaded -- I compiled ivtv from source and >>> executed the recommended mv commands. >>> >>> Any suggestions? >>> >>> My init messages are below. >>> >>> Thanks, >>> Kirk >>> >>> >>> >>> ivtv: ==================== START INIT IVTV ==================== >>> ivtv: version 0.4.1 (tagged release) loading >>> ivtv: Linux version: 2.6.14.4-wcpvr01 SMP gcc-3.4 >>> ivtv: In case of problems please include the debug info between >>> ivtv: the START INIT IVTV and END INIT IVTV lines, along with >>> ivtv: any module options, when mailing the ivtv-users mailinglist. >>> ivtv0: Autodetected WinTV PVR 350 card (cx23415 based) >>> ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 185 >>> ivtv0: Unreasonably low latency timer, setting to 64 (was 32) >>> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] >>> tveeprom 0-0050: The eeprom says no radio is present, but the tuner type >>> tveeprom 0-0050: indicates otherwise. I will assume that radio is >>> present. >>> tveeprom 0-0050: Hauppauge model 48132, rev K268, serial# 2985761 >>> tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) >>> tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) >>> tveeprom 0-0050: audio processor is MSP4448 (idx 27) >>> tveeprom 0-0050: decoder processor is SAA7115 (idx 19) >>> tveeprom 0-0050: has radio, has IR remote >>> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 >>> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] >>> saa7115 0-0021: ivtv driver >>> saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) >>> ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] >>> saa7127 0-0044: ivtv driver >>> saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) >>> ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44] >>> msp3400 0-0040: ivtv driver >>> msp3400 0-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio >>> mode=simpler >>> msp3400 0-0040: msp34xxg daemon started >>> ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40] >>> tda9887 0-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0) >>> ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] >>> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) >>> ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) >>> ivtv0: Encoder revision: 0x02050032 >>> ivtv0: Decoder revision: 0x02020023 >>> ivtv0: Allocate DMA encoder MPEG stream: 256 x 32768 buffers (8192KB >>> total) >>> ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB >>> total) >>> ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB >>> total) >>> ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB >>> total) >>> ivtv0: Create encoder radio stream >>> ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB >>> total) >>> ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB >>> total) >>> ivtv0: Create decoder VOUT stream >>> ivtv0: Allocate DMA decoder YUV stream: 48 x 43200 buffers (2048KB >>> total) >>> ivtv0: loaded v4l-cx2341x-init-mpeg.bin firmware (155648 bytes) >>> tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 >>> tuner: switching to v4l2 >>> tuner: tv freq set to 67.25 >>> tuner: tv 0x07 0x10 0x8e 0x01 >>> ivtv0: Initialized WinTV PVR 350, card #0 >>> ivtv: ==================== END INIT IVTV ==================== >>> _______________________________________________ >>> mythtv-users mailing list >>> [email protected] <mailto:[email protected]> >>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >>> <http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users> >>> >>> >>> >>> >>>-- >>>Joshua Frank >>>[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> >>> >>> >>>------------------------------------------------------------------------ >>> >>>_______________________________________________ >>>mythtv-users mailing list >>>[email protected] >>>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >> >>_______________________________________________ >>mythtv-users mailing list >>[email protected] >>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >> > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
