Well, I found a solution. In the mixer, along with the other mixer
settings, AC97 needs to be set to 0 and AC97 capture needs to have the
volume up.
Check this thread if you're curious.
http://www.linuxquestions.org/questions/showthread.php?t=233401
Dylan R. Semler wrote:
So I have an hd-3000 card and a cable connecting the audio out of the
card to the audio in of my SB live sound card. From the
documentation, I gather that I'm supposed have the following settings:
Line is muted and captur is enabled
PCM is at a high volume
Master is at a high volume
Capture is muted, at a high volume, and captur is enabled
Yet when I do all of this I still cannot hear any sound. If I simply
un-mute the line in, then i will here the non-synced live-tv sound
that doesn't correspond with the video. I've read some people say
that Line must also be at zero volume, but changing it's volume has no
effect. ALSA is enabled and I've set my audio output device to
ALSA:default in the general setup of the frontend. I've also
unchecked the box that says "use internal volume controls" so that it
is using an external mixer. I have also tried this using the internal
volume controls and using /dev/dsp as my audio output device. None of
these changes have any effects.
tvtime has no sound (unless I un-mute the line-in)
aplay /dev/dsp results in a few underruns but eventually they die
out--no sound however.
Everyone else seems to be able to solve this problem so easily, what
is going on here!?!
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
