----- Original Message -----
From: "Myth TV" <[EMAIL PROTECTED]>
To: "mythtv-users" <[email protected]>
Sent: Sunday, January 08, 2006 9:33 AM
Subject: [mythtv-users] Fail to tune channels in UK using
Rowridgetransmitter
However I am unable to tune it to any channel at all.
I have checked the card and reception using the dvb-utils and dvbstream.
I have managed to get all 85 Freeview channels information using the
command :-
# scan -u /usr/share/doc/dvb-utils/examples/scan/dvb-t/uk-Rowridge
>.tzap/channels.conf
and example of the BBC1 channel information I got is in the attached file.
I am then able to use the following commands to watch BBC1 channel using
the dvbstream :-
# tzap -r "BBC ONE"
# dvbstream -o -ps 600 601 -qam 16 -cr 3_4 | xine stdin://mpeg2
When trying to tune to BBC1 using the frequency tested under tzap/dvbsteam
of 489833330 I still get nothing. I get the same if I try to use the Full
Scan option.
Can someone please help me with the tuning of my card.
I assume your running the latest *stable* mythtv. When you say "When trying
to tune to BBC1 using the frequency tested under tzap/dvbsteam of 489833330
I still get nothing" Where did you put this frequency? From looking at your
attachments, if you didn't do so already you want to create a new transport
with the following details:
Standard: DVB
Frequency: 489833330
Bandwidth: 8 MHz
Inversion: Auto
Constellation: QAM 16
LP Coderate: Auto (I never bothered figuring out which was which out of
these two so just left em at auto)
HP Coderate: Auto
Trans. Mode: 2K
Gaurd Interval: 1/32
Hierachy: None
YMMV
But I had to set up ALL of my 6 transports for WinterHill manually. The
above will only give you BBC channels if the scan works.
HTH
Steve
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
