On Saturday 07 January 2006 21:34, Moasat wrote: > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of > > [EMAIL PROTECTED] > > Sent: Saturday, January 07, 2006 7:00 PM > > To: MythTV Users List > > Subject: [mythtv-users] X.org modeline for Samsung HLR5067W? > > > > > > I've done a bit of searching, but can't seem to find a > > definitive answer to the question, "what is the correct xorg > > modeline to use for the Samsung HLR5067W HDTV?" > > > > This is about the best I've found thus far: > > > > Modeline "1280x720" 79.159 1280 1424 1552 1760 720 723 730 750 > > > > But it's still overscanned along the bottom edge, a bit too > > short and a bit too narrow (actually, it's probably the > > perfect height, but the TV adjustments won't let me move the > > picture up any more, so there's black along the top and it's > > cutoff on the bottom). > > > > I'm under the assumption that this modeline should also work > > for the whole HLRxx67W series of Samsung HDTVs (which > > includes HLR4667W, HLR5067W, HLR5667W, HLR6167W). > > > > Anyone have the silver bullet? > > > > Thanks, > > Matt > > > > -- > > Matt Garman > > email at: http://raw-sewage.net/index.php?file=email > > I have the HLR5067W. I'm currently using a nvidia FX5200, VGA out. Its > also not perfect, I do have some black borders. In a dark theater room > though, they are not noticable. I've always planned on using the DVI > instead, I already have the cable, but swapping in a Windows drive just to > run powerstrip is more than I feel like doing right now, just to find what > looks good.
No need for Powerstrip, just look at the X log, the nvidia driver will tell you what the EDID information it receives from the TV connected via DVI tells it, which is exactly what powerstrip does. -- Steve _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
