> Does anyone have some straightforward instructions to get my PVR500 > working under knoppmyth r5a30 ? > > I originally had a PVR-350 but removed it in order to troubleshoot > this problem. I have installed the IVTV drivers Ver. 0.4.1 > I have copied my firmware to all of the places mentioned in the > /etc/hotplug/firmware.agent but the fw is never found upon bootup. > > > ivtv: ==================== START INIT IVTV ===================ivtv: > version 0.4.1 (tagged release) loading > ivtv: Linux version: 2.6.13.2-chw-3 SMP preempt 586 gcc-3.3 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: User specified WinTV PVR 150 card (detected cx23416 based chip) > ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 21 (level, low) -> IRQ 16 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 > TEA5767 detected. > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] > tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect > type set to 62 (Philips TEA5767HN FM Radio) > tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] > tveeprom: Second (radio) tuner idx 101 > tveeprom: ivtv version > tveeprom: Hauppauge: model = 23552, rev = D487, serial# = 8742851 > tveeprom: tuner = Samsung TCPN 2121P30A (idx = 87, type = 4) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > tveeprom: audio processor = CX25843 (type = 25) > tveeprom: decoder processor = CX25843 (type = 1e) > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] > ivtv0: This is the first unit of a PVR500 > cx25840 1-0044: ivtv driver > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 1-0044: unable to open firmware v4l-cx25840.fw > ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] > wm8775 1-001b: ivtv driver > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] > ivtv0: Detected a TEA5767 radio tuner. Enabling radio support. > ivtv0: unable to open firmware v4l-cx2341x-enc.fw > ivtv0: did you put the firmware in the hotplug firmware directory? > ivtv0 warning: failed loading encoder firmware > ivtv0 warning: failed loading encoder firmware > ivtv0 warning: Error loading firmware -3! > ivtv0: Error -3 initializing firmware. > ivtv0: Error -12 on initialization > ivtv: probe of 0000:03:08.0 failed with error -12 > ivtv0: User specified WinTV PVR 150 card (detected cx23416 based chip) > ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 22 (level, low) -> IRQ 17 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] > tveeprom: Second (radio) tuner idx 101 > tveeprom: ivtv version > tveeprom: Hauppauge: model = 23552, rev = D487, serial# = 8742851 > tveeprom: tuner = Samsung TCPN 2121P30A (idx = 87, type = 4) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > tveeprom: audio processor = CX25843 (type = 25) > tveeprom: decoder processor = CX25843 (type = 1e) > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] > cx25840 1-0044: ivtv driver > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 1-0044: unable to open firmware v4l-cx25840.fw > ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] > wm8775 1-001b: ivtv driver > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] > ivtv0: This is the second unit of a PVR500 > ivtv0: Correcting tveeprom data: no radio present on second unit > ivtv0: unable to open firmware v4l-cx2341x-enc.fw > ivtv0: did you put the firmware in the hotplug firmware directory? > ivtv0 warning: failed loading encoder firmware > ivtv0 warning: Error loading firmware -3! > ivtv0: Error -3 initializing firmware. > ivtv0: Error -12 on initialization > ivtv: probe of 0000:03:09.0 failed with error -12 > ivtv: ==================== END INIT IVTV ==================End of line > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > Have you read this ? http://www.ivtvdriver.org/index.php/Firmware
lots of good stuff on the site too. Cheers Marius _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
