On 17/01/06, Luke <[EMAIL PROTECTED]> wrote:
> Here is the output:
>
> [EMAIL PROTECTED] downloads]# /sbin/lsmod | grep lirc
> lirc_dev 12452 0
[Please dont top-post. In GMail, don't start typing at the top]
This shows that all of the LIRC modules are not loaded. If using a
serial port receiver, try
/sbin/modprobe lirc_serial
If using the Hauppauge i2c driver try
/sbin/modprobe lirc_i2c
and check your lsmod, log and /dev directory info again. You _should_
get the extra device(s) created that LIRC needs to work.
Nick
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
This is a bttv card with an onboard remote control port and hence requires the lirc_gpio module. The output of modprobe then is:
[EMAIL PROTECTED] downloads]# /sbin/modprobe lirc_gpio
FATAL: Module lirc_gpio not found.
Just in case, I have tried the lirc_i2c as well and here is the output:
[EMAIL PROTECTED] downloads]# /sbin/modprobe lirc_i2c
FATAL: Module lirc_i2c not found.
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
