Ok, that sounds good. Which directory does this assume I begin in?
You can double check in the linuxtv.org v4l wiki linked above to see if it matters, but it shouldn't. I have directories where I keep drivers for install. I think in my home directory I did:
mkdir v4l_dvb
cd v4l_dvb
and off you go... I remember it being pretty straightforward. I had some issues getting the device permissions to set and stay set properly after a reboot and would get permission errors for setting up the card in mythtv-setup when running as mythtv vs root. If you stumble there, get back to me and I'll try to figure out what I did. I remember it being not so elegant, but it worked. good luck,
Mike
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Thanks. Just did as you said and got:
[EMAIL PROTECTED] v4l-dvb]# modprobe dvb-bt8xx
WARNING: Error inserting bttv (/lib/modules/2.6.14- 1.1656_FC4/kernel/drivers/media/video/bttv.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting bt878 (/lib/modules/2.6.14-1.1656_FC4/kernel/drivers/media/dvb/bt8xx/bt878.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting dst (/lib/modules/2.6.14-1.1656_FC4/kernel/drivers/media/dvb/bt8xx/dst.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting dst_ca (/lib/modules/2.6.14-1.1656_FC4/kernel/drivers/media/dvb/bt8xx/dst_ca.ko ): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting dvb_bt8xx (/lib/modules/2.6.14-1.1656_FC4/kernel/drivers/media/dvb/bt8xx/dvb-bt8xx.ko): Unknown symbol in module, or unknown parameter (see dmesg)
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
