1.) When I try to change channels, I end up getting static on every other channel except channel three. I'm guessing that this is because the channel I'm changing is on the OVR receiver, and not the Motorola DCT2000 series set top box I'm connected to. I have a serial cable going out from the first serial port (which I'm assuming is ttyS0), and I got my hands on a copy of "channel" from here:
http://mysettopbox.tv/phpBB2/viewtopic.php?t=5906&view=previous&
Once I got the permissions on ttyS0 set correctly, I told mythtv to use /usr/bin/channel to change channels; this does not appear to work. I'm not sure how to look for output that might tell em what's going wrong here.
2.) I have a mobo with an nforce chipset (ABIT NF7-S), and thus SP/DIF output. I was able to get the digital sound working in xmms, so I know the sound works. However, I'm not sure how to get the sound working in MythTV. I tried following the instructions on this page, but still can't get sound:
http://www.mythtv.info/moin.cgi/DigitalSoundHowTo
Any help would be hugely appreciated! Best wishes to all.
Jack.
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
