Do yourself a favor, put it up on EBay.
It will get a much higher price than a built unit.  Quite frankly, I don't want 
it, here's why.
I bought an unbuilt kit of another vintage SBC, it cost a lot and drove me nuts 
because I wanted to build it and play.
So, I finally had to go and buy another built unit, because I couldn't bring 
myself to wrecking a perfect example of an unbuilt kit.

It doesn't matter if your kit will work or not, it's value is in the 
unassembled state.  It belongs in a museum to illustrate what "Building a 
computer" really meant in 1976.

Josh


To: [email protected]
Subject: Re: [N8VEM-S100:2122] Going back in time - The Cromemco Dazzler Board
From: [email protected]
Date: Sun, 29 Dec 2013 22:33:06 -0500


This *could* be someone's lucky day.  I have a Cromemco Dazzler kit that I 
might sell.  It was never built.  As far as I know, all the parts are included 
(mostly 74 TTL with a few 74LS) -- chips, caps., resistors, v regs., heat 
sinks, etc. etc.  Both S-100 cards are there (yes, *both* -- it was a 2 board 
design with an "interconnect cable"), and all the sockets for the chips.  
Included is the instruction manual -- containing technical info., 
troubleshooting guide, schematic and foil diagrams, and assembly instructions.  
It is in mint condition, but I have no idea if it will work, of course, because 
it is a kit (never assembled).  Cromemco stuff (IMHO) was always very high 
quality.  It used to be "the Cadillac" of S-100 gear.





So, if you want this thing, let me know.  I won't take low-ball offers.  I was 
fairly expensive when I bought it, and if I can't get a decent price for it, 
I'll just hang onto it (although I'm pretty sure that I'll never build it).  It 
is rare to find a Dazzler, and I'll bet that this is the only un-made one, in 
new condition with the original packaging, in the world.





















-- 

You received this message because you are subscribed to the Google Groups 
"N8VEM-S100" group.

To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].

For more options, visit https://groups.google.com/groups/opt_out.
                                          

-- 
You received this message because you are subscribed to the Google Groups 
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.

Reply via email to