Guys, I would like to get one 16MB board and three of the daughter boards. That will give me a spare daughter board in case I have problems soldering the memory chips and mess up one board.
Rick Bromagem Paul Birkel <[email protected]> wrote: >IFF we're going to do a volume purchase, than please list me for one board >with the two associated daughter-boards. I assume that we're talking about >a target cost of $25 given that there are three boards involved and thus >more in^2. > >If the intended panelization runs the daughter-boards across the top then >perhaps three should be included given the overall board width as compared >to an individual daughter-board length? > >Or perhaps they can be panelized along one end of the motherboard? > >(And it seems such a shame to see that real-estate across the upper-board >go to waste! Oops, be "underutilized" :->.) > > >On Thu, Feb 27, 2014 at 8:41 AM, Todd Goodman <[email protected]> wrote: > >> I'm willing to coordinate a larger purchase and will take three of these >> boards myself. >> >> Todd >> >> * monahanz <[email protected]> [140226 20:03]: >> > >> > >> > Back over 2 years ago Andrew and I put together an S100 bus "4MB Static >> RAM >> > board" with IEE-696 8/16bit data carrying capacity. This board has >> proven >> > to be very popular and very reliable. Over 30 boards were already made >> and >> > distributed to users. However in our quest to install 16 and 32 bit >> CPU's >> > on the S100 bus, 4MG has started to look like a limitation. The S100 bus >> > is capable of addressing up to 16MG. For this 4 of the above boards would >> > be needed. >> > >> > Over the past few years the price and availability of high speed static >> > RAM's have changed dramatically. It is now feasible to place 16MB of >> > high speed IEE-696 8/16 bit RAM on a single board. A prototype of this >> > board is described here:- >> > >> > >> http://s100computers.com/My%20System%20Pages/16M%20RAM%20Board/16MG%20RAM%20Board.htm >> > >> > It's unclear what the interest is in people obtaining a "commercial >> style" >> > bare board like this. I will definitely be getting 4 for myself. If you >> > absolutely need one sooner rather than later let Andrew know we can >> include >> > you in the early "first batch". Otherwise stay tuned for a later group >> > purchase by (hopefully) a group member that will organize a larger >> purchase >> > - at a lower price. If there is group member right now that could >> > coordinate a purchase all the better. >> > >> > -- >> > You received this message because you are subscribed to the Google >> Groups "N8VEM-S100" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> an email to [email protected]. >> > For more options, visit https://groups.google.com/groups/opt_out. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "N8VEM-S100" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > >-- >You received this message because you are subscribed to the Google Groups >"N8VEM-S100" group. >To unsubscribe from this group and stop receiving emails from it, send an >email to [email protected]. >For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
