Hi guys,
Everyone is paid in full - Thank you.
I intend to ship the USPS boards on April 4, but I might do them on the 3rd.
Does anyone know if USPS is open on Saturdays?
PS. I did more experiments with a 12V SLA battery and some load resistors.
The fusible trace was able to withstand a current of 8.5Amps (using a 2 and 3
ohm resistor in parallel).
The trace did glow and blow at 10.5Amps (using a 1 ohm resistor).
Using no resistor at all (only the resistance of my meter leads and the
battery's internal resistance), caused the (+16V) trace to pop in about 50mS.
In any case, the rest of the trace and gold plated finger did not get damaged.
I had no idea a 10mil trace could take such punishment. It's a 1oz copper
board with tin plating. I don't know how thick the tin plating is, 1 or 2 mil
at most I guess.
Regards,
Josh Bensadon
Fabio Battaglia 3 Boards -Paid -Shipped
Paul Birkel 8 Boards -Paid -Apr 4
Todd Goodman 3 Boards -Paid -Apr 4
Matt Turner 2 Boards -Paid -Mar 28
Michael Narigon 5 Boards -Paid -Shipped
Rick Bromagem 2 Boards -Paid -Apr 4
--
You received this message because you are subscribed to the Google Groups
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
