I'll take two also...

On Sun, May 11, 2014 at 12:18 PM, curt mayer <[email protected]> wrote:

> I you're doing a run of the one with the battery backup, put me down for
> two.
>
>
> On Friday, May 9, 2014 9:44:08 AM UTC-7, Edward Snider wrote:
>>
>> These are tweaks for the newer "RAM & ROM" board?  That's the one we are
>> going with (the one with the battery).
>> I didn't realize there was an improved board at first.
>>
>> Hopefully Andrew has time make these changes.
>>
>> Ed
>>
>>
>> On Friday, May 9, 2014 11:29:34 AM UTC-5, monahanz wrote:
>>>
>>> Guys that board has  been superseded by the “RAM & ROM” board. See here:-
>>>
>>> http://s100computers.com/My%20System%20Pages/RAM+ROM%
>>> 20Board/RAM+PROM%20Board.htm
>>>
>>>
>>>
>>> There is nothing particularly wrong with that board (except it is
>>> somewhat a bit of a pain to figure out the correct jumpers) but the newer
>>> board has things much more organized  *and *has onboard battery backup
>>> capability for the static RAM.  While it is fine as is, there are a few
>>> really minor tweaks that would be nice:-
>>>
>>>
>>>
>>> 1.       Connect pin 12 of U1D to pin 6 of P31
>>>
>>> 2.       Have ground pin option for pin 20 (CE) of U123
>>>
>>> 3.       Change the order of pins on K2 to avoid the need for wire-wrap
>>>
>>> 4.       Remove bA14 label on U100 and U101 and join U100 pin 28 to
>>> U101 pin 28 (both go to P14,7).
>>>
>>> If Andrew has time to splice these in, it might be worth waiting for. If
>>> so let’s call this board “V2 “
>>>
>>>
>>>
>>> John
>>>
>>>
>>>
>>>
>>>  --
> You received this message because you are subscribed to the Google Groups
> "N8VEM-S100" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.
>



-- 

~~ _/) ~~~~ _/) ~~~~ _/) ~~~~ _/) ~~

Tom Lafleur
(858) 759-9692

-- 
You received this message because you are subscribed to the Google Groups 
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to