John -
One more minor issue turned up tonight.
I set up my Z80 and 8088 so that the TMA0 line does the swapping using the
SMB. I did this to keep the mapping of the LPT1: at 378H in preparation
for MSDOS. If I understand things correctly this should be the preferred
method??
It now switches fine from Z80 --> 8088 but wouldn't switch back.
A manual QOEE,00 does the trick, and adding this code to the V10.32 monitor
was trivial. I just added
SW86_TM EQU 0EEH ;Output 00H to this port to switch to Z80
Hardware.
and
;------------- SWITCH CONTROL BACK TO Z80 (Master) ------------------
Z80: in al,SW86 ;This switches control back over to Z80
(old method)
MOV AL,00000000B ;Or reset TMO to Z80 control.
OUT SW86_TM,AL
nop
nop
nop
nop
nop
JMP BEGIN
- Gary
On Friday, July 18, 2014 12:39:46 AM UTC-4, monahanz wrote:
>
> Thanks for pointing that out Gary, will incorporate correction in the
> next update.
>
> John
>
>
>
>
>
> *From:* [email protected] <javascript:> [mailto:
> [email protected] <javascript:>] *On Behalf Of *[email protected]
> <javascript:>
> *Sent:* Thursday, July 17, 2014 7:59 PM
> *To:* [email protected] <javascript:>
> *Subject:* [N8VEM-S100:4625] Very minor 8088 monitor bug
>
>
>
> Extremely minor bug:
>
> IDE_SIGNON3 Option "X" appears twice (copy A->B should be "Y").
>
> It might cause somewhat trouble, if they accidentally select "X" to copy
> disks and end up over-writing.
>
> DB 'E=Clear Sec Buff F=Format Disk I=Next Sec J=Previous
> Sec',CR,LF
> DB 'L=Set LBA Value N=Power Down O=Disk ID Q=LBA
> Display Test',CR,LF
> DB 'R=Read Sector S=Seq Sec Rd U=Power Up V=Read N
> Sectors',CR,LF
> DB 'W=Write Sector X=Write N Sectors Y=Copy A->B Z=Verify
> A=B',CR,LF
> DB '(ESC) Back to Main Menu',CR,LF
> DB LF,'Current settings:- $'
>
> --
> You received this message because you are subscribed to the Google Groups
> "N8VEM-S100" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected] <javascript:>.
> For more options, visit https://groups.google.com/d/optout.
>
--
You received this message because you are subscribed to the Google Groups
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
