I've only tested with 2 & 4Mhz boards.
Some of the bus signals are tied direct to bus. We spoke about adding
line drivers
on these signals in hopes to have it work with faster clock rates.
John had suggested clocking with 7474 instead of the 123's.
On 08/ 1/14 12:34 PM, John Monahan wrote:
Remember guy’s this is for an IMSAI and early S100 boards. It will not
work with IEEE-696 boards that for example RAM boards that utilize the
full 24 bit address lines.
Also since it’s hard wired with LS123’s it will be bus clock speed
sensitive. Don, how fast have you gone with it.
Should be a nice addition to Josh’s 8080 board for example
John
*From:*[email protected]
[mailto:[email protected]] *On Behalf Of *Don Caprio
*Sent:* Friday, August 1, 2014 12:24 PM
*To:* [email protected]
*Subject:* Re: [N8VEM-S100:4777] Re: Announcing FPMini - IMSAI Style
front Panel Reproduction
Should work on 8080 and Z80
On Fri, Aug 1, 2014 at 11:50 AM, Andrew Bingham <[email protected]
<mailto:[email protected]>> wrote:
What CPUs will this work with? 8080? Z80?
On Friday, August 1, 2014 10:57:04 AM UTC-7, Don Caprio wrote:
Were getting ready to order what may be the final revision of the
S-100 Mini Front Panel Board (AKA FPMini).
I'd like to get an idea how many builders are interested in
obtaining this board.
If your interested please email me your request with desired
quantity.
I'm hoping to keep the board in the $25 range.
Special thanks to Rich and Josh (Crusty) for helping shake out
this board.
--
Don Caprio
[email protected] <mailto:[email protected]>
--
You received this message because you are subscribed to the Google
Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
-------------------------------
Don Caprio [email protected] <mailto:[email protected]>
http://www.uxpro.com
(925) 240-UNIX
--
You received this message because you are subscribed to the Google
Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
Don Caprio
[email protected]
--
You received this message because you are subscribed to the Google Groups
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
