Hi Rich, I had no idea what a "pour" was when I read your post, but a search lead me to the Wiki site and they have a nice write up. Learn something new every day, and that was definitely something worth learning!
Thanks, Josh > Date: Mon, 6 Oct 2014 21:20:03 -0400 > Subject: Re: [N8VEM-S100:5330] FP MIni Board heat sink > From: [email protected] > To: [email protected] > > Are you afraid of the traces right behind the pour? I guess mount the mica > washer rotated towards the right rather than towards the pins? > > Good thing I didn't solder mine in yet. > > Rich > > -- > Rich Cini > Collector of Classic Computers > Build Master and lead engineer, Altair32 Emulator > http://www.classiccmp.org/cini > http://www.classiccmp.org/altair32 > > > > > On 10/6/14, 9:08 PM, "John Monahan" <[email protected]> wrote: > > >There are quite a few LED's on the board so the regulator will run hot > >with > >a small heat sink. I always like to use the larger ones remembering in > >electronics, "heat kills". There is plenty of room anyway. See picture. > > > >John > > > > > >-----Original Message----- > >From: [email protected] [mailto:[email protected]] On > >Behalf Of Richard Cini > >Sent: Monday, October 6, 2014 5:46 PM > >To: S100-Post > >Subject: Re: [N8VEM-S100:5328] FP MIni Board heat sink > > > >What? Maybe I missed something somewhere. Where is there a risk of a > >short? > >I don¹t see where the HS would contact anything other than the pour under > >the HS. > > > >Rich > > > >-- > >Rich Cini > >Collector of Classic Computers > >Build Master and lead engineer, Altair32 Emulator > >http://www.classiccmp.org/cini > >http://www.classiccmp.org/altair32 > > > > > > > > > >On 10/6/14, 8:10 PM, "John Monahan" <[email protected]> wrote: > > > >>Just a reminder guys, be sure and use a mica washer under the 5V > >>regulator heat sink to prevent ground shorting on LHS front of board. > >>John > >> > >> > >>-----Original Message----- > >>From: [email protected] [mailto:[email protected]] > >>On Behalf Of Don Caprio > >>Sent: Saturday, October 4, 2014 5:24 PM > >>To: [email protected] > >>Subject: [N8VEM-S100:5319] FP MIni - International Shipments > >> > >>Guys, > >> > >>I completed the remaining international shipments today. > >> > >>I don't have time to go through the list and figure who paid shipping > >>and who are awaiting totals. > >> > >>This is on the honor system. If you pad sufficient postage ok, cool. > >>If not please send the balance. > >> > >>Matt Turner $9.50 > >>Ian McLaughlin 8.24 > >>Leon Byles 13.41 > >>Nik Brisevac 13.41 > >>Fabio Battaglia 20.07 > >>Malcom Macleod 26.73 > >> > >>Thank you. > >> > >>-- > >>Don Caprio > >>[email protected] > >> > >>-- > >>You received this message because you are subscribed to the Google > >>Groups "N8VEM-S100" group. > >>To unsubscribe from this group and stop receiving emails from it, send > >>an email to [email protected]. > >>For more options, visit https://groups.google.com/d/optout. > >> > >> > >>-- > >>You received this message because you are subscribed to the Google > >>Groups "N8VEM-S100" group. > >>To unsubscribe from this group and stop receiving emails from it, send > >>an email to [email protected]. > >>For more options, visit https://groups.google.com/d/optout. > > > > > >-- > >You received this message because you are subscribed to the Google Groups > >"N8VEM-S100" group. > >To unsubscribe from this group and stop receiving emails from it, send an > >email to [email protected]. > >For more options, visit https://groups.google.com/d/optout. > > > >-- > >You received this message because you are subscribed to the Google Groups > >"N8VEM-S100" group. > >To unsubscribe from this group and stop receiving emails from it, send an > >email to [email protected]. > >For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
