Hi John, please can you put me down for 1 x S100 > ISA converter board thanks David Fry
On Friday, October 10, 2014 9:39:34 PM UTC+1, monahanz wrote: > This is another S100 board that has a very long history. Andrew and I > did some 6 prototypes over the years! > > This is a board that can be used to utilize IBM PC/AT ISA bus boards in > the S100 bus. I have used it principally to construct and debug various > ISA VGA video boards. However it can be used for other boards as well > such as serial, parallel I/O boards etc. It will not work with ISA boards > that require DMA or Interrupt requests. It's primary use is to checkout > MSDOS software with PC hardware. > > Please note this is a highly experimental board and definitely not of > general interest. I contains some 6 GALS (22V10's) that allow a large > amount of inter-bus signal arrangements. Please see here for a brief > summary/description of the board:- > > > http://s100computers.com/My%20System%20Pages/ISA%20to%20S100%20Bus/ISA%20To%20S-100%20Bus%20Board.htm > > Anyway I'm about to send off an order (to Advance Circuits), for one or > two boards for my future use, these will be boards without gold plated S100 > bus connections -- since the board will only be used occasionally. > > I’m surprised with the response for the MSX – VDP video board (I thought > only a few would want one) so just in case some S100 bus die-hards would > like a copy of this board please let me know ASAP. This is definitely > going to be a one-time order. Attached is a picture of the board in > KiCAD. > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
