John, I'd like one as well.
Andrew B On Friday, October 10, 2014 4:51:08 PM UTC-7, monahanz wrote: > > Ok guys, I guess there are more die-hard S100 users out there than I > realized! Was actually expecting no response. Seeing the interest I > will go ahead and order the board from PCBCart with actual gold fingers > etc. i.e. a production board. For the same reason, I have just added > the ability of the ISA bus to trigger S100 bus interrupts. Realize for > serial ISA boards that might be useful. I’m going to Europe Sunday, so I > will try and get both these orders (PCBCart) out by tomorrow night. > Thanks for the offer Todd, I’ll just do it here. > > > > John > > > > > > > > *From:* [email protected] <javascript:> [mailto: > [email protected] <javascript:>] *On Behalf Of *monahanz > *Sent:* Friday, October 10, 2014 1:40 PM > *To:* [email protected] <javascript:> > *Subject:* [N8VEM-S100:5357] An S100 Bus to IBM-PC ISA Bus converter > board. > > > > This is another S100 board that has a very long history. Andrew and I did > some 6 prototypes over the years! > > > > This is a board that can be used to utilize IBM PC/AT ISA bus boards in > the S100 bus. I have used it principally to construct and debug various > ISA VGA video boards. However it can be used for other boards as well > such as serial, parallel I/O boards etc. It will not work with ISA boards > that require DMA or Interrupt requests. It's primary use is to checkout > MSDOS software with PC hardware. > > > > Please note this is a highly experimental board and definitely not of > general interest. I contains some 6 GALS (22V10's) that allow a large > amount of inter-bus signal arrangements. Please see here for a brief > summary/description of the board:- > > > > > http://s100computers.com/My%20System%20Pages/ISA%20to%20S100%20Bus/ISA%20To%20S-100%20Bus%20Board.htm > > > > Anyway I'm about to send off an order (to Advance Circuits), for one or > two boards for my future use, these will be boards without gold plated S100 > bus connections -- since the board will only be used occasionally. > > I’m surprised with the response for the MSX – VDP video board (I thought > only a few would want one) so just in case some S100 bus die-hards would > like a copy of this board please let me know ASAP. This is definitely > going to be a one-time order. Attached is a picture of the board in KiCAD. > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
