Nope, same issue. I double-checked the terminal settings and it¹s a
known-working serial board (used with the Z80 board). Very odd. Might have
to put my protocol analyzer on it.


Rich

--
Rich Cini
Collector of Classic Computers
Build Master and lead engineer, Altair32 Emulator
http://www.classiccmp.org/cini
http://www.classiccmp.org/altair32

From:  Richard A Cini <[email protected]>
Reply-To:  S100-Post <[email protected]>
Date:  Saturday, November 1, 2014 at 3:03 PM
To:  S100-Post <[email protected]>
Subject:  Re: [N8VEM-S100:5495] MSDOS/SCP-8086 minor success!

Yeah, I thought so too so I commented it out in CICO but not CI. Maybe it
needs to be both. I¹ll give that a whirl.

Rich

--
Rich Cini
Collector of Classic Computers
Build Master and lead engineer, Altair32 Emulator
http://www.classiccmp.org/cini
http://www.classiccmp.org/altair32

From:  John Monahan <[email protected]>
Organization:  Vitasoft
Reply-To:  S100-Post <[email protected]>
Date:  Saturday, November 1, 2014 at 2:52 PM
To:  S100-Post <[email protected]>
Subject:  RE: [N8VEM-S100:5493] MSDOS/SCP-8086 minor success!

Sounds like a bit 7 input problem
John
 
 

From: [email protected] [mailto:[email protected]] On
Behalf Of Richard Cini
Sent: Saturday, November 1, 2014 11:10 AM
To: S100-Post
Subject: [N8VEM-S100:5491] MSDOS/SCP-8086 minor success!
 

All ‹

 

                Before John let me on to the Weller programming software, I
found WinHex to split the files. While not intuitive, it did work and I was
able to program the split ROMs with my other programmer.

 

                Well, I had some minor success with this. I modified the
8086 monitor slightly to use different console I/O bits in routines CO and
CSTS. I get the monitor banner so the output is fine. The monitor doesn¹t
accept any character input (it echos with ³?² and rings the bell).

 

                The monitor also complains that it can¹t find the 8259 PIC.
When I did the testing during the build, it passed so I don¹t know what¹s up
there.

 

                Since the EPROM section is working at least, I may try to
program the original SCP monitor program and see if that works.

 

Rich

 

--

Rich Cini

Collector of Classic Computers

Build Master and lead engineer, Altair32 Emulator

http://www.classiccmp.org/cini

http://www.classiccmp.org/altair32
-- 
You received this message because you are subscribed to the Google Groups
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
For more options, visit https://groups.google.com/d/optout.
-- 
You received this message because you are subscribed to the Google Groups
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
For more options, visit https://groups.google.com/d/optout.


-- 
You received this message because you are subscribed to the Google Groups 
"N8VEM-S100" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to