John, I'll also take an ISA connector.
Thanks! - Alex On Fri, Dec 5, 2014 at 11:59 AM, David Fry <[email protected]> wrote: > Hi John, > > I'll take one of the right angled ISA connectors off you for $5, > > regards > > David Fry > > On Friday, December 5, 2014 4:43:19 PM UTC, monahanz wrote: > >> Guys I see that I have about 10 of these ISA bus connectors for the ISA >> to S100 bus board. I cannot remember where I got them, probably eBay. >> Anyway IF you like, for those getting this board, I can include one >> connector at say $5 each. Please let me know. I also have 7 of the V9938 >> chips. Probably only need 3 backups myself. For those who want one for the >> VDP board I can also include a chip at say $10/chip. Absolutely no >> warranties on either of the above. Chips will not be tested. First >> come/ first served. Please send me a personalized e-mail on address changes >> and on the above. monahan AT vitasoft.org >> >> On Friday, December 5, 2014 12:37:32 AM UTC-8, monahanz wrote: >> >>> Well I finally have gotten around to building the final/production >>> versions of the S100 bus VDP board, the 8/16MB Static RAM board with >>> the RAM chips soldered directly to the board. Also done is the PC-ISA to >>> S100 bus converter board. I delighted to say all 3 boards are working >>> fine though I was doing some heavy sweating soldering in the four 2MGX8 SMD >>> RAM chips! Info on the boards can be found here. >>> >>> VDP :- http://s100computers.com/My%20System%20Pages/VDP%20Video% >>> 20Board/VDP%20Board.htm >>> >>> 16MB RAM:- http://s100computers.com/My%20System%20Pages/16M%20RAM% >>> 20Board/16MG%20RAM%20Board.htm >>> >>> ISA Converter:- http://s100computers.com/My%20System%20Pages/ISA%20to% >>> 20S100%20Bus/ISA%20To%20S-100%20Bus%20Board.htm >>> >>> Looks like the is a diverse number of pre-ordered boards. Digging back >>> through my e-mails below is the mailing list I will work from. *Please >>> immediately let me know if there is an error*. I also have one or two >>> boards left over for each of the 3 boards for any late arrivals. I >>> have lost track of all paperwork and orders for these boards (there are >>> some 6 boards in the works currently or varying numbers) so I going to >>> charge $16/board + shipping. I’m traveling (again) to Europe early >>> next week so will ship on Saturday 13th. >>> >>> Name VDP Board 16MB Board ISA to S100 Board >>> >>> Fabio Battaglia 3 3 >>> 3 >>> >>> Paul Birkel 2 >>> 1 >>> >>> Matt Turner 2 2 >>> 2 >>> >>> Pete Plank 2 >>> >>> Gary Kaufman 2 1 >>> 1 >>> >>> Josh Bensadon 2 >>> >>> Yoda* 1 >>> >>> Leon Byles 1 1 >>> >>> James Cobb* 1 >>> >>> Max Scane 1 >>> >>> Dan Werner* 1 >>> >>> Ian May 1 >>> >>> Todd Goodman >>> 3 >>> >>> Robert Greenstreet 1 1 >>> 1 >>> >>> David Fry 1 1 >>> 1 >>> >>> J. Alex Jacocks >>> 1 >>> >>> Andrew Bingham >>> 1 >>> >>> Thomas Owen* >>> 2 >>> >>> Jonathan Haddox* 1 >>> >>> Brian Marstella* >>> 2 >>> >>> James Cobb* 1 >>> >>> Frank Schieschke* >>> 2 >>> >>> Kipp Yeakel* >>> 1 >>> >>> Thierry Schembri* >>> 1 >>> >>> Neil Breeden* >>> 2 >>> >>> Ants Pants* 1 >>> >>> >>> >>> I need full names and shipping addresses for names with a “*” after your >>> name. Send (privately) to my e-mail address monahanATvitasoft.org (Change >>> the AT to @) >>> Do not send payment until you get the board(s). >>> Thanks >>> John Monahan >>> >>> >>> >>> >>> >>> >>> >>> >>> >> -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
