I'd take two. I definitely agree that power LEDs and probe grips would be very desirable.
Sent from my iPhone > On Jan 29, 2015, at 3:12 AM, Fabio Battaglia <[email protected]> wrote: > > I'd go for 4x of these too! > >> On Jan 29, 2015 8:57 AM, "Paul Birkel" <[email protected]> wrote: >> Don: I can think of a number of uses that I might make of this. I'll take >> four, if you please ... go for 50! >> >> Suggestions since you have space: add power-on LEDs to the three rails and >> heavy-duty +5/GND posts that are separated out for snap-on clips to a logic >> probe. Maybe the latter is what's happening at the rt-hand end of the PCB >> ... can't quite make out what you mean by those grey lines :-<. >> >>> On Thu, Jan 29, 2015 at 2:47 AM, Don Caprio <[email protected]> wrote: >>> >>> When I'm doing testing on S-100 boards in my bus extender card >>> I find it difficult to find pins especially on the back of the board. >>> Tried various methods mostly using labels and hand writing bus >>> pin definitions on the limited space. Have you ever wished there >>> was a better way? Me too. >>> >>> Maybe there is a better way. Perhaps there's a better mouse trap >>> but I came up with this simple PCB design that you can mount in >>> a bus extender card to make life a little easier. >>> >>> Curious if any of you would find this useful. Might be a bit of an overkill >>> since were really only interested in a handful of bus signals, but I tried >>> to cover all the bases. Some of the more sophisticated boards are making >>> use of more signals and expanded bus addressing. >>> >>> I'll be ordering a limited quantity for myself and would be happy to >>> include others. The board would be about $3.50 with qty 25 pricing, >>> $2.00 qty 50 (2 for price of 1). >>> >>> Thanks for your feedback. >>> >>> >>> >>> <S100BusTestPointPCB.jpg> >>> -- >>> Don Caprio >>> [email protected] >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "N8VEM-S100" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "N8VEM-S100" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
