Hi folks, I've been facing difficulties since quite a while getting my system work reliably at 10 MHz. I did add a termination board, checked that all relevant chips were F-types, but after some time, the whole shebang getting warmer, the system was suddenly freezing, to such a point that even a reset was not even feasible.
I just bough a couple of freezing sprays - yes, two, I also have an old analog synth to debug ! - and could narrow down the issue to U32, after replacing it by a 74F74, things are running even after several hours running an endless loop that displays a counter on the VGA screen. Was even able to do it with only one wait state on IOs ! I also swapped U28 and U29 to a F chip in my previous attempts but I do not think that was the actual issue, I left them in place though, just wanted you guys to know, my system works now stable as a Swiss watch, despite their is no fan - yet - and this gets quite warm anyway.. Philippe -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
