Yes the Master Z80 monitor talks to the Propeller I/O board fine. That board is normally configured for I/O ports 0 and 1H. If you have it otherwise you need to modify the code. Also be sure the status bit jumpers are correct. Again, I use the configuration on the S100Computers web site.
Good luck John From: [email protected] [mailto:[email protected]] Sent: Sunday, April 26, 2015 12:21 PM To: [email protected] Subject: [N8VEM-S100:6827] Question about Z80 Version 2 board I am in the process of building the latest S100 Z80 Version 2 board. I have a question. First, I want to use the Z80 board with the prop I/O board. Is the Z80 Master ROM setup for this? On the S100Computers site the latest ROM is version 5.04 which has two 4K sections but in the writeup I didn't see any mention of support for the propeller I/O board. Any help would be great. Thanks -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
