I believe they are Molex 0.156" pitch. I don't remember if they have a name like the "KK" series but search on the 156. You can get them in IDC style.
Sent from my iPhone > On May 19, 2015, at 10:12 PM, Jeff Albrecht <[email protected]> > wrote: > > Perhaps someone can teach me how to order Molex connectors and/or perhaps > recognize what I believe is a fairly standard connector. At least back in the > early S-100 days. I have looked online to order but my eyes cross after a bit > trying to narrow it down. Perhaps this connector has a group or 'kind' name > below Molex to further differentiate it? > > I've seen this connector on several Solid State Music boards, and it is very > similar, if not exact, to the battery terminal for a CompuPro System Support > Board (SSB). The spacing seems the same as a four (4) connector plug for a 5 > 1/4" FDD or older IDE drive although the pins on this connector are narrower. > > The two (2) pins are square about 1.5mm wide, 14mm long and 3.8mm spaced > apart. They are not polarized, which was kind of a pain on the CompuPro SSB > for battery polarity (it is lightly polarized). > > > > > -- > You received this message because you are subscribed to the Google Groups > "N8VEM-S100" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
