Guy’s I’d rather not get into the GAL burning business, just ordering and shipping this number of board is a real chore. Gary if you could do the GAL’s that would really be great. I’m not sure how you want to handle it, get a bunch from Jameco and send via US mail would be the easiest, I suppose.
I’m up to my eyeballs in stuff here with more boards coming, spending more time on that hopefully will provide more users with much more to play with. Worse still I a bunch or travel trips due. As I outlined previously the reality is that most boards from now on will require one or two GAL’s. They are dirt cheap and very easy to program with PALSAM. I highly recommend “users” get familiar with them. For the real “die hard’s”, I also getting into CPLD’s. These are essentially super GAL’s. On the current 80486 prototype one PLCC based CPLD would replace 6 GAL’s. However in that case I’ll probably supply the chip since the number of users I assume will be less. John -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Gary Kaufman Sent: Saturday, May 23, 2015 1:35 PM To: [email protected]; [email protected] Subject: Re: [N8VEM-S100:7066] Re: A V3 version of our Dual IDE/CF card S100 board. If you're in the USA, I'd be happy to program a few for you. Contact me off list if I can help. - Gary On 5/23/2015 4:23 PM, G. Beat wrote: > Would be interested in 1. > However, I don't have ability to program GAL, with recent shop update. > > greg > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
