Gary, I got it to work! I am not sure what I was doing wrong, but now I can boot CF-A with CP/M 3. I guess I will have to make the changes to U15 in order to get CF-B to work.
Thanks for the help, Harold On Tuesday, June 30, 2015 at 9:35:25 AM UTC-4, [email protected] wrote: > Hi Everyone. > > I have been building up a system with the Z80 board, 4MB memory board, > Dual IDE/CF, and the prop I/O. I have finished this and am using the V5.02 > ROM on the Z80. The system boots up to the menu. However I can't do very > much except check memory and display. > > Now I want use my V2 Dual IDE/CF to boot up CP/M. Unfortunately the link > on s100computers for the jumper and switch setup is not working! I was > wondering what people use for settings on SW1, SW2. I think I have jumpers > K1 and K5 set okay. > > I also found a thread about CF images for the IDE/CF board, but the date > was several years ago. Is there a location where I can copy a disk image > for CP/M? I have the Kingston 4GB CF. > > Any help would be great! > > Thanks > Harold > -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
