I send my board to a number of site, looks at cost and delivery: I build 2-4-6 layer boards I use:
http://www.seeedstudio.com/blog/tag/fusion-pcb/ or http://imall.itead.cc/open-pcb.html or http://www.pcb-overseas.com/npus/index.html?PHPSESSID=9kb8rsufbe64m7amo1j4pdfms2 or http://www.ourpcb.com/ On Sun, Aug 2, 2015 at 6:32 PM, Tom Lafleur <[email protected]> wrote: > I given up on local board making, I just let shops in China make them and > wait the two to three week to get them via China Post, or 4 to 5 day via DHL > > better board, tested, solder mask, silkscreen... > > > > On Sun, Aug 2, 2015 at 5:47 PM, Crusty OMO <[email protected]> wrote: > >> Hi Todd, >> >> KiCad isn't very hard to learn, there's a youtube video tutorial on it. >> I've heard good things about direct transfer, but never used it. Photo >> resist is tricky, I've done it a few times and by the time you master it, >> you will waste several boards. >> >> Cheers, >> Josh >> >> >> ------------------------------ >> Date: Sun, 2 Aug 2015 12:07:48 -0700 >> From: [email protected] >> To: [email protected] >> Subject: [N8VEM-S100:7481] Home brew PCBs >> >> >> I haven't etched a PCB since I was a teenager. Now I have >> the need to make some simple boards. They only need to >> be single sided using up to eight or so 16-20 pin Dips and >> a few caps, LEDs and what not. >> >> I don't need anything fancy as I will use my Laser printer. >> >> Eagle is $169 for the simple version, but this is too much >> as I only need to make a few boards. >> >> Whats available that is low cost that others may have used ? >> >> One more question, direct transfer or photo resist ?? >> >> Todd >> >> >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "N8VEM-S100" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "N8VEM-S100" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > > -- > > ~~ _/) ~~~~ _/) ~~~~ _/) ~~~~ _/) ~~ > > Tom Lafleur > > -- ~~ _/) ~~~~ _/) ~~~~ _/) ~~~~ _/) ~~ Tom Lafleur -- You received this message because you are subscribed to the Google Groups "N8VEM-S100" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
