I have attached the snmptt.ini that I use. Make sure you have: net_snmp_perl_enable = 1 net_snmp_perl_best_guess = 1 translate_value_oids = 1 translate_log_trap_oid = 1 translate_enterprise_oid_format = 1 translate_trap_oid_format = 1 translate_varname_oid_format = 1 mibs_environment = ALL
<quote who="Sorin VALCU">
> Hello
>
> I'm trying to use SNMP Traps in Nagios.
>
> The SNMP Traps are collected by snmptrapd that passes them to
> snmptthandler and then to snmptt.
>
> Snmptt (via an EXEC command) writes a service status notification
> in the nagios.cmd file.
>
> The problem is that snmptt can not translate the traps received
> from a cisco catalyst.
>
> All OID's in the snmptt.conf file are all numeric values.
>
> All the cisco mibs (snmp v1) are present in the
> /usr/share/snmp/mibs/ directory.
>
> There is no snmp.conf file.
>
> Here is the output from the snmptt.debug file.
>
> Thank you for your help
>
> Sorin V
--
And, did Guloka think the Ulus were too ugly to save?
-Centauri
snmptt.ini
Description: Binary data
