Title: check_if_by_snmp output

Hi List,

I just installed the snmp4nagios with all the required libraries. Now when I am trying to execute the following command, I am getting the output as below. But according to the document, the output should be something in different way. I believe there is something wrong. Can anyone give some idea on this?

./check_if_by_snmp -R /opt/rrdtool/ -T -L -H localhost -i 2 -I eth0

Timeout! Peer = localhost, OID = 1.3.6.1.2.1.2.2.1.7.2

Whereas the output should be in this way as below

OK - eth0: I: 1410937 kO, 12672117 Pkt; O: 1339265 kO, 12722878 Pkt

|’estimated speed’=100000000

’input octets’=1444800491c ’input packets’=12672117c ’input errors’=0c

’output octets’=1371407644c ’output packets’=12722878c ’output errors’=0c


Regards,

Mrutyunjaya Dash

IT Engineer

Juniper Networks Pvt Ltd.

Bangalore

Reply via email to