|
Hello Again Jeff, I do apologize for the delay in my response. I ran the the nagios script with -x and this was the output. I still unclear to me why I get the error. Any ideas would be greatly appreciated. See below [EMAIL PROTECTED] init.d]# service nagios start + '[' -f /etc/rc.d/init.d/functions ']' + . /etc/rc.d/init.d/functions ++ TEXTDOMAIN=initscripts ++ umask 022 ++ PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin ++ export PATH ++ '[' -z '' ']' ++ COLUMNS=80 ++ '[' -z '' ']' +++ /sbin/consoletype ++ CONSOLETYPE=pty ++ '[' -f /etc/sysconfig/i18n -a -z '' ']' ++ . /etc/sysconfig/i18n +++ LANG=en_US.UTF-8 +++ SUPPORTED=en_US.UTF-8:en_US:en +++ SYSFONT=latarcyrheb-sun16 ++ '[' pty '!=' pty ']' ++ export LANG ++ '[' -z '' ']' ++ '[' -f /etc/sysconfig/init ']' ++ . /etc/sysconfig/init +++ BOOTUP=color +++ GRAPHICAL=yes +++ RES_COL=60 +++ MOVE_TO_COL=echo -en \033[60G +++ SETCOLOR_SUCCESS=echo -en \033[0;32m +++ SETCOLOR_FAILURE=echo -en \033[0;31m +++ SETCOLOR_WARNING=echo -en \033[0;33m +++ SETCOLOR_NORMAL=echo -en \033[0;39m +++ LOGLEVEL=3 +++ PROMPT=yes ++ '[' pty = serial ']' ++ '[' color '!=' verbose ']' ++ INITLOG_ARGS=-q + prefix=/usr/local/nagios + exec_prefix=/usr/local/nagios + NagiosBin=/usr/local/nagios/bin/nagios + NagiosCfg=/usr/local/nagios/etc/nagios.cfg + NagiosLog=/usr/local/nagios/var/status.log + NagiosTmp=/usr/local/nagios/var/nagios.tmp + NagiosSav=/usr/local/nagios/var/status.sav + NagiosCmd=/usr/local/nagios/var/rw/nagios.cmd + NagiosVar=/usr/local/nagios/var + NagiosRun=/usr/local/nagios/var/nagios.lock + NagiosLckDir=/var/lock/subsys + NagiosLckFile=nagios + NagiosCGI=/usr/local/nagios/sbin + Nagios=apache + test -f /usr/local/nagios/bin/nagios + test -f /usr/local/nagios/etc/nagios.cfg + echo 'Starting network monitor: nagios' Starting network monitor: nagios + su -l apache -c 'touch /usr/local/nagios/var/nagios.log /usr/local/nagios/var/status.sav' *This account is currently not available. * + rm -f /usr/local/nagios/var/rw/nagios.cmd + /usr/local/nagios/bin/nagios -d /usr/local/nagios/etc/nagios.cfg + '[' -d /var/lock/subsys ']' + touch /var/lock/subsys/nagios + sleep 1 + status_nagios nagios + test '!' -f /usr/local/nagios/var/nagios.lock ++ head -n 1 /usr/local/nagios/var/nagios.lock + NagiosPID=18594 + test -x /usr/local/nagios/sbin/daemonchk.cgi + ps -p 18594 PID TTY TIME CMD 18594 ? 00:00:00 nagios + return 0 Thank you, Sameka Prather Office of Internet Services [EMAIL PROTECTED] 301-713-1384 x 109 jeff vier wrote: > On Fri, 2006-03-31 at 07:34 -0500, Sameka Prather wrote: > >> I am not sure what you mean. Do you want me to add -s to the first >> line in the script #! -x? So that line would look like #! /bin/sh -x. >> > > without the space after the #!, yes. > > #!/bin/sh -x > > a quick google search found: > http://www.injunea.demon.co.uk/pages/page213.htm > Thank you, Sameka Prather Office of Internet Services [EMAIL PROTECTED] 301-713-1384 x 109 Sameka Prather wrote: > Hello Again Jeff, > > I do apologize for the delay in my response. > I ran the the nagios script with -x and this was the output. I still unclear to me why I get the error. Any ideas would be greatly appreciated. See below > [EMAIL PROTECTED] init.d]# service nagios start > + '[' -f /etc/rc.d/init.d/functions ']' > + . /etc/rc.d/init.d/functions > ++ TEXTDOMAIN=initscripts > ++ umask 022 > ++ PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin > ++ export PATH > ++ '[' -z '' ']' > ++ COLUMNS=80 > ++ '[' -z '' ']' > +++ /sbin/consoletype > ++ CONSOLETYPE=pty > ++ '[' -f /etc/sysconfig/i18n -a -z '' ']' > ++ . /etc/sysconfig/i18n > +++ LANG=en_US.UTF-8 > +++ SUPPORTED=en_US.UTF-8:en_US:en > +++ SYSFONT=latarcyrheb-sun16 > ++ '[' pty '!=' pty ']' > ++ export LANG > ++ '[' -z '' ']' > ++ '[' -f /etc/sysconfig/init ']' > ++ . /etc/sysconfig/init > +++ BOOTUP=color > +++ GRAPHICAL=yes > +++ RES_COL=60 > +++ MOVE_TO_COL=echo -en \033[60G > +++ SETCOLOR_SUCCESS=echo -en \033[0;32m > +++ SETCOLOR_FAILURE=echo -en \033[0;31m > +++ SETCOLOR_WARNING=echo -en \033[0;33m > +++ SETCOLOR_NORMAL=echo -en \033[0;39m > +++ LOGLEVEL=3 > +++ PROMPT=yes > ++ '[' pty = serial ']' > ++ '[' color '!=' verbose ']' > ++ INITLOG_ARGS=-q > + prefix=/usr/local/nagios > + exec_prefix=/usr/local/nagios > + NagiosBin=/usr/local/nagios/bin/nagios > + NagiosCfg=/usr/local/nagios/etc/nagios.cfg > + NagiosLog=/usr/local/nagios/var/status.log > + NagiosTmp=/usr/local/nagios/var/nagios.tmp > + NagiosSav=/usr/local/nagios/var/status.sav > + NagiosCmd=/usr/local/nagios/var/rw/nagios.cmd > + NagiosVar=/usr/local/nagios/var > + NagiosRun=/usr/local/nagios/var/nagios.lock > + NagiosLckDir=/var/lock/subsys > + NagiosLckFile=nagios > + NagiosCGI=/usr/local/nagios/sbin > + Nagios=apache > + test -f /usr/local/nagios/bin/nagios > + test -f /usr/local/nagios/etc/nagios.cfg > + echo 'Starting network monitor: nagios' > Starting network monitor: nagios > + su -l apache -c 'touch /usr/local/nagios/var/nagios.log /usr/local/nagios/var/status.sav' > *This account is currently not available. * > + rm -f /usr/local/nagios/var/rw/nagios.cmd > + /usr/local/nagios/bin/nagios -d /usr/local/nagios/etc/nagios.cfg > + '[' -d /var/lock/subsys ']' > + touch /var/lock/subsys/nagios > + sleep 1 > + status_nagios nagios > + test '!' -f /usr/local/nagios/var/nagios.lock > ++ head -n 1 /usr/local/nagios/var/nagios.lock > + NagiosPID=18594 > + test -x /usr/local/nagios/sbin/daemonchk.cgi > + ps -p 18594 > PID TTY TIME CMD > 18594 ? 00:00:00 nagios > + return 0 > > > Thank you, > Sameka Prather > Office of Internet Services > [EMAIL PROTECTED] > 301-713-1384 x 109 > > > > > > jeff vier wrote: >> On Fri, 2006-03-31 at 07:34 -0500, Sameka Prather wrote: >> >>> I am not sure what you mean. Do you want me to add -s to the first >>> line in the script #! -x? So that line would look like #! /bin/sh -x. >>> >> >> without the space after the #!, yes. >> >> #!/bin/sh -x >> >> a quick google search found: >> http://www.injunea.demon.co.uk/pages/page213.htm >> |
