Tom Brown wrote: >> thanks for this - This is exactly what i am after however i have an issue... >> >> when i run it after making a couple of mode for community string and >> snmp version etc i get this >> >> # ./retrieve_custom_snmp -H 192.168.12.176 -o 1.3.6.1.4.1.2021.56 >> >> and thats it - no output. if i enable debug i get this >> >> # cat /tmp/foobar >> Retrieve exit code is >> Retrieve status message is: >> >> ie nothing - can you offer any assistance here? >> > > OK better... > > # ./retrieve_custom_snmp -H 192.168.12.176 -o .1.3.6.1.4.1.2021.55 > UCD-SNMP-MIB::ucdavis.55.101.1 = STRING: "CRITICAL emcpowera, 2 dead, 2 > alive, possible LUN tresspass or HBA failure" > > but it there a way to remove the "UCD-SNMP-MIB::ucdavis.55.101.1 = > STRING: " so i just see the text of the string? >
sed be thy friend. I didn't catch the beginning of the discussion, but if you append | sed 's/.*STRING: //' to whatever command you're running it should work pretty ok, although with decently recent tools you should also be able to pass -Ovq to snmpget and achieve pretty much the same result with less overhead. -- Andreas Ericsson [EMAIL PROTECTED] OP5 AB www.op5.se Tel: +46 8-230225 Fax: +46 8-230231 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
