A hostname check would be much more informative, or check_nrpe - if the other guy in your office doesn't have NRPE installed, then a check_nrpe will fail.

Note that the way you have it setup, check_uptime will always run on the Nagios server, regardless, because it's a local plugin. So whatever the IP of your router (Nagios machine), it will always succeed. You need to be using NRPE in conjunction with it to get it to check by IP address. Even that will always succeed at the moment because your IP in your Nagios configuration is 127.0.0.1, which will always refer to itself.

You're much better off having this as a service. For every host in my install I have a "Server Availability" service which is a check_ping, as this constantly monitors that the servers are up and responding, every minute, and doesn't create any havoc from host checks being run too often.

Andy.

-------- Original Message --------
Subject:        Re: [Nagios-users] Uptime error
Date:   Wed, 28 Feb 2007 19:12:50 +0530
From:   sujith h <[EMAIL PROTECTED]>
To:     Andy Shellam (Mailing Lists) <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]>



Actually we used check_ping till 5 months before and then we decided to move on to uptime . The reason is that suppose I have a machine named don whose ip is 192.102.1.2 <http://192.102.1.2> and if my machine is down for 1 day. And some other guy in my office started his machine his dhcpclient will run and give my ip (Think as if for the time being). Now the ping will work in any case but the uptime wont. So that is why I decided to move on with uptime
in Host check.

Sujith

Bangalore

On 2/28/07, *Andy Shellam (Mailing Lists)* <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > wrote:

   You can do it by setting scheduled host checks, but it's very
   performance-intensive, and *will* affect your service checks.
   Your uptime check will do what you want much better if you add it as
   a service to your host.

   Why are you so insistent you don't want to use check_ping as your
   host command and Uptime as a service?

   Andy.


   sujith h wrote:
    The use of option : use_aggressive_host_checking=1
    in the nagios.cfg file will make any difference???

     Sujith

     Bangalore

    On 2/28/07, *Andy Shellam (Mailing Lists) *
    <[EMAIL PROTECTED]
    <mailto:[EMAIL PROTECTED]>> wrote:

        sujith h wrote:
        I think i foregot to explain a crucial point that nagios is
        running in my router not in my
        machine. If i had told u my machine, then I really apolagise
        for stealing your precious
time.

        No, I understand that.

        And is there anyway that I can trigger the check_uptime
        (plugin written by me)
        all the time when the router is up???

        Yes.  Define it as a service for your host that runs, say,
        every 5 minutes 24x7.

        . If so please do tell me. If the router is down and
        nagios doesnt run then its ok for me. Since that is a
        different issue. But from your reply
        I came to understand that check_uptime will be called for the
        first time when the nagios
        is started and then if any of the services fails then again
        the check_uptime is called.

        Yes.  Nagios only checks a host status when it absolutely
        needs to, not any other time.  This is usually when a service
        fails, or a network blockage is detected.  check_ping to
        127.0.0.1 <http://127.0.0.1> on this check would work fine in
        your case.

        Andy.



        Sujith

        Bangalore.

        On 2/28/07, *Andy Shellam (Mailing Lists) * <
        [EMAIL PROTECTED]
        <mailto:[EMAIL PROTECTED]>> wrote:

            Again, as I and Patrick have said, your host's
            check_command is only getting run when a service is
            deemed to have problems.

            You're getting the difference in the uptime output in
            Nagios and the console because Nagios hasn't run the
            uptime command for the host for over a day.
            If you're not retaining status information, then when you
            restart Nagios, it re-runs all it's checks, hence why it
            then gets updated.  After that it is only run when a
            service fails.

            What I still don't understand is how your uptime command
            ensures the router is up?  If the router is not up, then
            Nagios won't be running (as you're running it on the same
            host) so it seems quite pointless really.  If the Lanlink
            checks that the LAN interface is up and connected - that
            makes sense, but then a check_ping to 127.0.0.1
            <http://127.0.0.1> as your host check_command would give
            the same result as the uptime, then you could have an
"Uptime" service with your check_uptime command.
            That way you could be confident that the status detail in
            Nagios is reasonably up-to-date.

            Andy.





-- Andy Shellam
   NetServe Support Team

   the Mail Network
   "an alternative in a standardised world"

   p: +44 (0) 121 288 0832/0839
   m: +44 (0) 7818 000834


!DSPAM:37,45e58730103001671241165!

--
Andy Shellam
NetServe Support Team

the Mail Network
"an alternative in a standardised world"

p: +44 (0) 121 288 0832/0839
m: +44 (0) 7818 000834

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Nagios-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting 
any issue. 
::: Messages without supporting info will risk being sent to /dev/null

Reply via email to