I'm sure this has been addressed but I can't find any resolutions that seem to work in my environment. My apologies in advance.
I am trying to use check_by_ssh to invoke remote system/service checks rather than using nrpe. I have had great success with nrpe but I do not have the authority to implement using nrpe because of the nature of the critical services running on some of our machines and the absolute 24/7 requirement. A high level of paranoia keeps nrpe out of the mix. So in order to use nagios and remote service/system checks I need check_by_ssh. I've set up a test command to run a remote check_load using check_by_ssh and when I run it manually it works as expected. When it is run in the nagios framework I get the "(No output!)" result. There is no banner enabled on the client. The key exchange is working fine. I even updated the check_by_ssh by getting the 1.4.10 plugin package this morning. Any input on what to look at or additional debug flags to set would be greatly appreciated. ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
