I am trying to view the status of port 1 on a Cisco 2970 switch.
However, Nagios is giving me an UNKNOWN error. I tried running the
following from a command prompt:
./check_snmp -H <IP of the switch> -C <string> -o ifOperStatus.1 -r 1
I get the following response:
SNMP OK - up(1) | RFC1213-MIB::ifOperStatus.1=up(1)
If I am getting this response at the command prompt, why isn't the
monitor coming up green in Nagios?
Thanks,
Mike
Mike Egan
Enterprise Network Engineer
Capital Safety
3833 Sala Way
Red Wing, MN 55066
651-385-6254 Office
651-247-5719 Cell
[EMAIL PROTECTED] <blocked::mailto:[EMAIL PROTECTED]>
Home of DBI-Sala and Protecta Brands. Visit us on the web at
www.capitalsafety.com <blocked::http://www.capitalsafety.com/>
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
