Trevor Obba asks: > I have an EMC CLARiiON AX150 I would like to monitor disk usage, > fan, power supply, battery, temperature and uptime using Nagios's > check_snmp plug-in but when I snmpwalk my Emc it does not seem give > any MIBS on disk usage, fan, power supply e.t.c Can anyone please > enlighten me on this?
Based on the snmpwalk provided, you don't have the EMC (Data General, actually) MIB installed in your SNMP setup. You'll need to locate that someplace on EMC's web-site. There's not a whole lot in the MIB, either; it's mainly trap definitions. I've got one that I faked up so my SNMP management system (also running Nagios) can properly understand traps if anybody's interested. +----------------------------------------------+-----------------------+ | Carl Richard Friend (UNIX Sysadmin) | Natick, Massachusetts | | Minicomputer Collector / Enthusiast | 01760-2098 | | mailto:[EMAIL PROTECTED] +-----------------------+ | http://users.rcn.com/crfriend/museum | ICBM: 42:18N 71:21W | +----------------------------------------------+-----------------------+ ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Nagios-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
