G,
When I installed NRPE recently I used the xinetd installation, whereas
it looks like you're utilising the nrpe in daemon mode.
Therefore I may not be of as much help here, but I would check things
such as SeLinux configuration (try putting it in warn mode and see
whether you still get this error) and iptables configuration on the box.
When I performed this test, I actually only did it from the Nagios
monitoring hosts (as that was indicative of my requirements), you might
want to check that test as well.
Thanks
Giles
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bhat
nag
Sent: 27 February 2008 14:40
To: Hari Sekhon
Cc: nagios-users@lists.sourceforge.net
Subject: Re: [Nagios-users] (no subject)
Hi,
I tried with both the option using hostname as well as ip address.
Still I am getting the same error.
Regds
G Bhat
On Wed, Feb 27, 2008 at 6:16 PM, Hari Sekhon <[EMAIL PROTECTED]>
wrote:
Bhat nag wrote:
> After that I am used the command to check the nrpe, but I am
> getting the error as
>
> root @ isosrvr : /opt/nrpe/bin >./check_nrpe -H localhost -n
> CHECK_NRPE: Response packet had invalid CRC32.
I have found that you cannot use localhost when using nrpe, try the
hostname instead.
-h
--
Hari Sekhon
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
