I did the the same thing the other day. Make sure the nrpe.cfg is readable by the nrpe daemon. Make sure that the path to the command is correct.
Thanks Steve Pribyl Senior Infrastructure Practitioner Peel, Inc 990 Grove St. Suite 204 Evanston, IL 60201 Phone: 847-424-0954 ex 14 Cell: 847-343-2349 Fax: 847-424-0986 [EMAIL PROTECTED] On 05/28/2008 01:38 PM, Kaushal Shriyan wrote: > Hi > > when i run the below command i get NRPE: Unable to read output > > sudo -u nagios /usr/nagios/libexec/check_nrpe -H localhost -c > check_total_procs > NRPE: Unable to read output > > Thanks and Regards > > Kaushal > > > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > ------------------------------------------------------------------------ > > _______________________________________________ > Nagios-users mailing list > Nagios-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/nagios-users > ::: Please include Nagios version, plugin version (-v) and OS when reporting > any issue. > ::: Messages without supporting info will risk being sent to /dev/null ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
