Also, I should mention this is the latest NRPE version, but more importantly, we ran ./configure without SSL as I have had too many problems with it.
Thanks again, Izz > -----Original Message----- > From: [EMAIL PROTECTED] > Sent: Wed, 11 Jun 2008 21:41:25 -0800 > To: nagios-users@lists.sourceforge.net > Subject: Re: [Nagios-users] NRPE host on Solaris 10 > > still the same error: Received 0 bytes from daemon... > > results from the two commands requested (everything looks ok to me): > > # svcs svc:/network/nrpe/tcp:default > STATE STIME FMRI > online Jun_10 svc:/network/nrpe/tcp:default > > # inetadm -l svc:/network/nrpe/tcp:default > SCOPE NAME=VALUE > name="nrpe" > endpoint_type="stream" > proto="tcp" > isrpc=FALSE > wait=FALSE > exec="/usr/sfw/sbin/tcpd -c /usr/local/nagios/etc/nrpe.cfg -i" > arg0="/usr/local/nagios/bin/nrpe" > user="nagios" > default bind_addr="" > default bind_fail_max=-1 > default bind_fail_interval=-1 > default max_con_rate=-1 > default max_copies=-1 > default con_rate_offline=-1 > default failrate_cnt=40 > default failrate_interval=60 > default inherit_env=TRUE > default tcp_trace=FALSE > tcp_wrappers=TRUE > # > > The only thing I see different between this output and that on the site > listed where I installed the remote host NRPE is there is no default for > tcp_wrappers and no connection_backlog. But this shouldn't be the > problem, right? > > Thanks again for your assistance, > Izz > >> -----Original Message----- >> From: [EMAIL PROTECTED] >> Sent: Wed, 11 Jun 2008 10:21:58 +0100 >> To: nagios-users@lists.sourceforge.net >> Subject: Re: [Nagios-users] NRPE host on Solaris 10 >> >>> From: [EMAIL PROTECTED] [mailto:nagios-users- >>> [EMAIL PROTECTED] On Behalf Of Izz Abdullah >>> >>> I have followed the instructions I found at >>> http://www.utahsysadmin.com/2008/03/14/configuring-nagios-plugins-nrpe- >>> on-solaris-10/ >>> >>> but to no avail. At the end of it all, when I try >>> ./check_nrpe -H localhost >>> >>> it gives me a 0 bytes received from daemon. The first check in the >>> list of >>> /usr/local/nagios/libexec/check_disk -w 10 -c 5 -p / >>> gives data...I don't know what's wrong here...I haven't configured a >>> Solaris box to be monitored...any ideas / assistance? >> >> >From your description, it seems like the plugins are working OK but the >> problem is with the service itself. That's not surprising, SMF on >> Solaris >> 10 can be tricky to get right. I'd double check the entire section in >> those instructions from "With Solaris 10, we don't use either inetd ..." >> to "Modify your hosts.allow ...". In particular make sure your >> inetd.conf >> entry is on one line (as the instructions say but then split over three >> lines because of the narrow width of the page). If it's still not >> working, post back with the relevant section of inetd.conf and the >> output >> of >> >> svcs svc:/network/nrpe/tcp:default >> >> and >> >> inetadm -l svc:/network/nrpe/tcp:default >> >> -- >> Phil Costelloe >> Foundation IT, Hermitage Berkshire RG18 9SE >> >> >> >> >> ------------------------------------------------------------------------- >> Check out the new SourceForge.net Marketplace. >> It's the best place to buy or sell services for >> just about anything Open Source. >> http://sourceforge.net/services/buy/index.php >> _______________________________________________ >> Nagios-users mailing list >> Nagios-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/nagios-users >> ::: Please include Nagios version, plugin version (-v) and OS when >> reporting any issue. >> ::: Messages without supporting info will risk being sent to /dev/null > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Nagios-users mailing list > Nagios-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/nagios-users > ::: Please include Nagios version, plugin version (-v) and OS when > reporting any issue. > ::: Messages without supporting info will risk being sent to /dev/null ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
