Hi Dei!
On Fri, 24 Apr 2009, Dei Bertine wrote:
> Hi all,
>
> I got the first part set-up on monitoring my network equipment.
> Ran the verify and everything was OK.
> However when I go to the Nagios page, I see these logs in my network
> equipment:
> "SNMP problem - No data received from host "
>
> This is the notification email I got:
> Notification Type: PROBLEM
> Service: PING
> Host: CISCO
> Address: 172.168.2.1
> State: UNKNOWN
> Date/Time: Thu Apr 23 21:29:00 EDT 2009
> Additional Info:
> SNMP problem - No data received from host
>
> This is a sample of my cfg file:
> define service{
> use local-service ; Inherit
> values from a template
> host_name cisco-router ; The name
> of the host the service is associated with
> service_description PING ; The service
> description
> check_command check_snmp!-C public -o sysUpTime.0
> normal_check_interval 5 ; Check the
> service every 5 minutes under normal conditions
> retry_check_interval 1 ; Re-check
> the service every minute until its final/hard state is determined
> }
>
> Not sure on this but is there anything in the router/switch that need to
> enable?
Yes, you'll probably need to configure your router to accept SNMP polls
from your Nagios box.
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensign option that enables unlimited
royalty-free distribution of the report engine for externally facing
server and web deployment.
http://p.sf.net/sfu/businessobjects
_______________________________________________
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
