Hi Phil,
check_result_reaper_frequency=10
max_check_result_reaper_time=30
Regards,
Faiz
Monitoring
From: Randal, Phil [mailto:phil.ran...@hoopleltd.co.uk]
Sent: Tuesday, August 13, 2013 5:17 PM
To: Nagios Users List
Subject: Re: [Nagios-users] Nagios check latency
What are your
check_result_reaper_frequency
and
max_check_result_reaper_time
set to?
I use 3 and 15 respectively here.
Cheers,
Phil
--
Phil Randal
Infrastructure Engineer
Hoople Ltd | Thorn Office Centre | Hereford HR2 6JT
Tel: 01432 260415 | Email:
phil.ran...@hoopleltd.co.uk<mailto:phil.ran...@hoopleltd.co.uk>
From: Muhamad Faiz [mailto:muhamad.f...@asia.xchanging.com]
Sent: 13 August 2013 04:49
To: Nagios Users List
Subject: [Nagios-users] Nagios check latency
Hi guys,
My Nagios setup are having high service check latency.
Check nagios latency result is 240 seconds!
./check_nagios_latency.sh -w 30 -c 60
CRITICAL: Latency at 240.183 seconds!
Modification in my Nagios.cfg file is only as below. Other than this, is
default.
# MODIFIED
admin_email=muhamad.f...@asia.xchanging.com<mailto:admin_email=muhamad.f...@asia.xchanging.com>
admin_pager=muhamad.f...@asia.xchanging.com<mailto:admin_pager=muhamad.f...@asia.xchanging.com>
translate_passive_host_checks=1
log_event_handlers=0
use_large_installation_tweaks=1
enable_environment_macros=0
enable_embedded_perl=0
use_embedded_perl_implicitly=0
max_concurrent_checks=1600
service_perfdata_file_processing_command=process-service-perfdata-file-pnp-bulk
host_perfdata_file_processing_command=process-host-perfdata-file-pnp-bulk
service_perfdata_file_processing_interval=60
host_perfdata_file_processing_interval=60
status_update_interval=40
# /usr/local/nagios/bin/nagios -s /usr/local/nagios/etc/nagios.cfg
Nagios Core 3.5.0
Copyright (c) 2009-2011 Nagios Core Development Team and Community Contributors
Copyright (c) 1999-2009 Ethan Galstad
Last Modified: 03-15-2013
License: GPL
Website: http://www.nagios.org
Timing information on object configuration processing is listed
below. You can use this information to see if precaching your
object configuration would be useful.
Object Config Source: Config files (uncached)
OBJECT CONFIG PROCESSING TIMES (* = Potential for precache savings with -u
option)
----------------------------------
Read: 0.415803 sec
Resolve: 0.006900 sec *
Recomb Contactgroups: 0.001862 sec *
Recomb Hostgroups: 3.819786 sec *
Dup Services: 0.637380 sec *
Recomb Servicegroups: 3.419804 sec *
Duplicate: 0.000417 sec *
Inherit: 0.013748 sec *
Recomb Contacts: 0.000000 sec *
Sort: 0.000000 sec *
Register: 0.616385 sec
Free: 0.029930 sec
============
TOTAL: 8.962015 sec * = 7.899897 sec (88.15%) estimated savings
RETENTION DATA TIMES
----------------------------------
Read and Process: 0.863815 sec
============
TOTAL: 0.863815 sec
Timing information on configuration verification is listed below.
CONFIG VERIFICATION TIMES (* = Potential for speedup with -x option)
----------------------------------
Object Relationships: 0.080360 sec
Circular Paths: 0.001152 sec *
Misc: 0.011244 sec
============
TOTAL: 0.092756 sec * = 0.001152 sec (1.2%) estimated savings
EVENT SCHEDULING TIMES
-------------------------------------
Get service info: 0.051265 sec
Get host info info: 0.032301 sec
Get service params: 0.000010 sec
Schedule service times: 0.002476 sec
Schedule service events: 0.002514 sec
Get host params: 0.000000 sec
Schedule host times: 0.000937 sec
Schedule host events: 0.001287 sec
============
TOTAL: 0.090790 sec
Projected scheduling information for host and service checks
is listed below. This information assumes that you are going
to start running Nagios with your current config files.
HOST SCHEDULING INFORMATION
---------------------------
Total hosts: 11753
Total scheduled hosts: 7
Host inter-check delay method: SMART
Average host check interval: 300.00 sec
Host inter-check delay: 42.86 sec
Max host check spread: 30 min
First scheduled check: Tue Aug 13 11:43:54 2013
Last scheduled check: Tue Aug 13 11:43:54 2013
SERVICE SCHEDULING INFORMATION
-------------------------------
Total services: 18662
Total scheduled services: 170
Service inter-check delay method: SMART
Average service check interval: 535.76 sec
Inter-check delay: 3.15 sec
Interleave factor method: SMART
Average services per host: 1.59
Service interleave factor: 1
Max service check spread: 30 min
First scheduled check: Tue Aug 13 11:52:49 2013
Last scheduled check: Tue Aug 13 11:58:39 2013
CHECK PROCESSING INFORMATION
----------------------------
Check result reaper interval: 10 sec
Max concurrent service checks: 1600
PERFORMANCE SUGGESTIONS
-----------------------
I have no suggestions - things look okay.
Any advice will be much appreciated.
Regards,
Faiz
"CONFIDENTIALITY NOTICE: This message and any attachment are confidential and
may also be privileged. If you are not the intended recipient of this e-mail
you may not copy, forward, disclose or otherwise use it or any part of it in
any form whatsoever. If you are not the intended recipient please telephone or
e-mail the sender and delete this message and any attachment from your system."
Hoople Ltd, Registered in England and Wales No. 7556595
Registered office: Plough Lane, Hereford, HR4 0LE
"Any opinion expressed in this e-mail or any attached files are those of the
individual and not necessarily those of Hoople Ltd. You should be aware that
Hoople Ltd. monitors its email service. This e-mail and any attached files are
confidential and intended solely for the use of the addressee. This
communication may contain material protected by law from being passed on. If
you are not the intended recipient and have received this e-mail in error, you
are advised that any use, dissemination, forwarding, printing or copying of
this e-mail is strictly prohibited. If you have received this e-mail in error
please contact the sender immediately and destroy all copies of it."
------------------------------------------------------------------------------
Introducing Performance Central, a new site from SourceForge and
AppDynamics. Performance Central is your source for news, insights,
analysis and resources for efficient Application Performance Management.
Visit us today!
http://pubads.g.doubleclick.net/gampad/clk?id=48897511&iu=/4140/ostg.clktrk
_______________________________________________
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
