I love Kupa! I bought a e-file for the feet from medicool and it is junk. 
$200. It quit working within 2 months so I sent it back and had to fight with 
them, because they wanted me to pay $20 for shipping. $10 each way. They was 
not easy to deal with. They did eventually send me a new one and the darn bits 
won't stay in the drill. Keeps slipping out when I am using it. Now Kupa, they 
are wonderful. Their drills are wonderful. Can't say enough about them.
 
Angie Wingerter




________________________________
From: "[email protected]" <[email protected]>
To: [email protected]
Sent: Tuesday, June 16, 2009 12:49:33 AM
Subject: NailTech:: Re: has any tried foredom tools for filing

Pati,
I did like the Kupa. Burt for a cheaper piece, the EnT is a good alternative. 
The handpiece is not as bulky as the Kupa. 
Believe me, the Kupa was like heaven when I first got it. 
Sure wish I could say mine lasted as long!
Buenos dias,
Lynnette 
Sent via BlackBerry from T-Mobile
________________________________
From: Pati 
Date: Tue, 16 Jun 2009 00:38:04 -0400
To: <[email protected]>
Subject: NailTech:: Re: has any tried foredom tools for filing
hmmm holly,
 I probably should NOT say this but...my original KUPA (is it 200??) is about 
at least 15 years old and has been in to be repaired ONCE! about 8 years 
ago...that is when i bought the other one (2500?)...which needed repair within 
the first year but has been fine since!  So I would defintely recommend a KUPA 
again....

 Pati

When life gives you a hundred reasons to cry...
Show life that you have a thousand reasons to smile....

-----Original Message-----
From: holly cliffe <[email protected]>
To: [email protected]
Sent: Mon, Jun 15, 2009 12:00 pm
Subject: NailTech:: Re: has any tried foredom tools for filing


 Simmy  Since is Aseptico manufactures dental drills, I use one of their   
dental engineers.  It looks like this piece is still under warranty,   in which 
case they will replace it.  I love the design and comfort of   this handpiece, 
it's very similar to the Erica's.  It balances very   well in my hand, no 
vibration.  However, it clearly isn't standing up   to the wear and tear of a 
busy nail business.  I have looked at the   Kupa and Medicool online and am not 
sure if the handpiece is as well   designed.  I'm starting to think it might be 
wise to go with a less   expensive machine, so I can just buy a new one of 
every two   years.....these repairs sometimes cost as much as the new 
equipment.    As mentioned in the earlier email, I was very happy with the 
Erica,   but servicing it became a problem up here in Canada.  I couldn't get   
parts to repair it so I had to buy a new machine (hence the   Aseptico), but it 
did last for 5 years.  Which e-files do
 you recomend?  I thought that the "craft tools" would be a problem with 
vibration,   just thought I'd throw it out there because those Foredom tools 
are   pretty rugged and will last decades.  Holly Cliffe Vancouver, 
[email protected]   On 15-Jun-09, at 7:43 AM, [email protected] wrote:  > Hi 
Holly, > I'm an E-File Educator for Vicki Peters. > The type of tool you 
mentioned is considered a "craft" tool. These   > tools were not made for use 
on the human body. They are also not   > designed for use all day long by a 
nail tech. The handpiece is not   > as balanced as handpieces designed for our 
use. This non ergonomic   > design will most certainly increase the onset of 
Carpul Tunnel   > Syndrome. Also, craft tools have way too much vibration which 
also   > cause CTS and discomfort for the client.   For proper ergonomics,   > 
your handpiece should have little to no vibration. > As far as your current 
e-files having problems, make sure you are   > sending
 your handpiece in every 6 months to 1 year for   > maintenance.  If you are 
already doing that, I suggest you lobby   > the companies for a replacement. > 
VERY frustrating, I know! > Who did you send the handpiece in to for repair? > 
Simmy > Sent from my Verizon Wireless BlackBerry > > -----Original Message----- 
> From: holly cliffe <[email protected]> > > Date: Sun, 14 Jun 2009 22:51:21 > 
To: <[email protected]> > Subject: NailTech:: has any tried foredom 
tools for filing > > > > > I have had an Erica's MT 20 drill, 2 years with my 
first aseptico > handpiece and my new one year old aseptico handpiece ($350) is 
> breaking down now....there has to be equipment out there that is well > 
designed for low vibration and comfort.  I am looking at foredom > rotary 
tools.  There is quite a selection of flexible shaft tools > that are used for 
jewellry making, dentistry and wood > carving.....anyone ever used these for 
nails? > > Holly Cliffe > Vancouver,
 BC > [email protected] > > > > >   


________________________________
Make your summer sizzle with fast and easy recipes for the grill. 




--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"NailTech" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/NailTech?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to