I'm wondering if it can be repaired. They didn't take my complaint seriously 
and blamed it on handpiece maintenance! I don't know how the handpiece 
could affect the control box. (Warp speed-----great description!)
 Marsha McDonald Rubino
GIMME NAILS @ the Devonshire
37 Fifth St. E. Suite 102
Kalispell, Montana 59901
[email protected]





________________________________
From: Diane MacQuoid <[email protected]>
To: [email protected]
Sent: Wednesday, June 17, 2009 9:32:15 AM
Subject: NailTech:: Re: has any tried foredom tools for filing

Mine did that too!   Went into warp speed all on it's own!    Thank goodness I 
had a backup.     I was wondering what it would cost for repair as I really 
liked how it worked.

Diane MacQuoid
Tuff Enuff Nails
www.tuffenuffnails.com



Marsha Rubino wrote: 
I have had my Kupa efile for about 8 years....love it. I've had my Vicki Peters 
efile for about 2 years....I like it, it handles similarly to my Kupa, BUT, 
just after the 1 year mark passed, the control box began to act up....it would 
speed up without my assistance. I sent it in to be repaired. They said  it 
wasn't a control box issue...the file needed  cleaning...so I paid $60 for 
maintenance. Now, 6 months later, the control box is stuck on the highest speed 
and I can't get  it to slow down! What a PITA.....
 Marsha McDonald Rubino
GIMME NAILS @ the Devonshire
37 Fifth St. E. Suite 102
Kalispell, Montana 59901
[email protected]





________________________________
From: Mary Thorsfeldt <[email protected]>
To: [email protected]
Sent: Tuesday, June 16, 2009 10:27:37 PM
Subject: NailTech:: Re: has any tried foredom tools for filing



I love my Vicki Peters e-file!  I have used it for 2 going on 3 years, dropped 
hand piece several times.  Still works like a charm.  You cannt hardly hear it 
that it is on.  Balances nice in my hand.   ( :  Mary 



-----Original Message-----
From: "Pati" [[email protected]]
Date: 06/16/2009 04:40 PM
To: [email protected]
Subject: Re: NailTech:: Re: has any tried foredom tools for filing

hmmm holly,
 I probably should NOT say this but...my original KUPA (is it 200??) is about 
at least 15 years old and has been in to be repaired ONCE! about 8 years 
ago...that is when i bought the other one (2500?)...which needed repair within 
the first year but has been fine since!  So I would defintely recommend a KUPA 
again....

 Pati

When life gives you a hundred reasons to cry...
Show life that you have a thousand reasons to smile....

-----Original Message-----
From: holly cliffe <[email protected]>
To: [email protected]
Sent: Mon, Jun 15, 2009 12:00 pm
Subject: NailTech:: Re: has any tried foredom tools for filing


 Simmy  Since is Aseptico manufactures dental drills, I use one of their   
dental engineers.  It looks like this piece is still under warranty,   in which 
case they will replace it.  I love the design and comfort of   this handpiece, 
it's very similar to the Erica's.  It balances very   well in my hand, no 
vibration.  However, it clearly isn't standing up   to the wear and tear of a 
busy nail business.  I have looked at the   Kupa and Medicool online and am not 
sure if the handpiece is as well   designed.  I'm starting to think it might be 
wise to go with a less   expensive machine, so I can just buy a new one of 
every two   years.....these repairs sometimes cost as much as the new 
equipment.    As mentioned in the earlier email, I was very
 happy with the Erica,   but servicing it became a problem up here in Canada.  
I couldn't get   parts to repair it so I had to buy a new machine (hence the   
Aseptico), but it did last for 5 years.  Which e-files do you recomend?  I 
thought that the "craft tools" would be a problem with vibration,   just 
thought I'd throw it out there because those Foredom tools are   pretty rugged 
and will last decades.  Holly Cliffe Vancouver, BC [email protected]   On 
15-Jun-09, at 7:43 AM, [email protected] wrote:  > Hi Holly, > I'm an E-File 
Educator for Vicki Peters. > The type of tool you mentioned is considered a 
"craft" tool. These   > tools were not made for use on the human body. They are 
also not   > designed for use all day long by a nail tech. The handpiece is not 
  > as balanced as handpieces designed for our use. This non ergonomic   > 
design will most certainly increase the onset of Carpul
 Tunnel   > Syndrome. Also, craft tools have way too much vibration which also  
 > cause CTS and discomfort for the client.   For proper ergonomics,   > your 
handpiece should have little to no vibration. > As far as your current e-files 
having problems, make sure you are   > sending your handpiece in every 6 months 
to 1 year for   > maintenance.  If you are already doing that, I suggest you 
lobby   > the companies for a replacement. > VERY frustrating, I know! > Who 
did you send the handpiece in to for repair? > Simmy > Sent from my Verizon 
Wireless BlackBerry > > -----Original Message----- > From: holly cliffe 
<[email protected]> > > Date: Sun, 14 Jun 2009 22:51:21 > To: 
<[email protected]> > Subject: NailTech:: has any tried foredom tools 
for filing > > > > > I have had an Erica's MT 20 drill, 2 years with my first 
aseptico
 > handpiece and my new one year old aseptico handpiece ($350) is > breaking 
 > down now....there has to be equipment out there that is well > designed for 
 > low vibration and comfort.  I am looking at foredom > rotary tools.  There 
 > is quite a selection of flexible shaft tools > that are used for jewellry 
 > making, dentistry and wood > carving.....anyone ever used these for nails? > 
 > > Holly Cliffe > Vancouver, BC > [email protected] > > > > >    


________________________________
Make your summer sizzle with fast and easy recipes for the grill. 








--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"NailTech" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/NailTech?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to