No flash curing with Axxium either.
You can get a beautiful french if you apply the pink right up to the area where 
you want the white to begin on all five nails. Then take a dry brush to sharpen 
the smile before curing. After the pink cures, apply the white and cure. Makes 
a perfect, bump free french. 
Elaine, I did suggest the dry brush, but the tip was given to me by someone 
from Facebook. I forget who and hope she jumps front and center.  
HTH!
Buenos dias,
Lynnette
http://www.facebook.com/nailtech       Sent via BlackBerry from T-Mobile

-----Original Message-----
From: Pati <[email protected]>
Date: Thu, 17 Jun 2010 01:44:54 
To: <[email protected]>
Subject: Re: NailTech::  sog frenchs....was Thanks to all the LURKERS :)

mine didn't run at all so no need for flash curing.... (I used Shellac)


Pati

'Good friends are like stars... 
You don't always see them, But you know they are always there.



-----Original Message-----
From: Renee Parnell <[email protected]>
To: [email protected]
Sent: Wed, Jun 16, 2010 9:37 am
Subject: Re: NailTech:: Thanks to all the LURKERS :)


So you flash cure each finger as soon as you get the white on it?


On Wed, Jun 16, 2010 at 9:14 AM, Elena Desmonie, NY <[email protected]> wrote:

With the Eco I apply my pink first, cure, then I apply my white like I would 
with regular polish.  I then flash cure the white for 10 seconds to set my 
line.  I can also fix the white prior to flash curing just like regular 
polish....I use a clean dry brush for this if needed.  The key is making the 
line not too thick.  Just thick enough to get coverage.
Hope this helps.
Elena

--


You received this message because you are subscribed to the Google Groups 
"NailTech" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nailtech?hl=en.






-- 
Renee Parnell



Chattanooga, TN


-- 
You received this message because you are subscribed to the Google Groups 
"NailTech" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nailtech?hl=en.

 

-- 
You received this message because you are subscribed to the Google Groups 
"NailTech" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nailtech?hl=en.


-- 
You received this message because you are subscribed to the Google Groups 
"NailTech" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nailtech?hl=en.

Reply via email to