-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

On Thursday, August 14th, 2025 at 15:20, Pedro Prado <pedro.pr...@gmail.com> 
wrote:

> Hey James


Hi Pedro,

Thanks for the response. Ah OK, this looks like it is the same as the command I 
mentioned: "show forwarding destination".


#show forwarding destination ?  dst-ipv4                 Destination IPv4 
Address
  dst-ipv6                 Destination IPv6 Address
  dst-l4-port              L4 Destination Port
  dst-mac                  MAC address for the destination
  edit                     Edit the configured packet
  eth-type                 Ethertype
  flow-label               IPv6 Flow Label
  gre-checksum             Generate GRE Checksum field
  gre-key                  GRE Key
  gre-sequence             GRE Sequence
  gre-type                 GRE type
  hop-limit                IPv6 Hop Limit
  ingress-interface        Ingress Interface
  inner                    Inner packet configuration
  inner-vlan               Inner VLAN ID
  ip-protocol              IP Protocol
  ip-ttl                   IP TTL
  next-header              IPv6 Next Header
  nvgre-flow-id            NVGRE Flow ID
  nvgre-virtual-subnet-id  NVGRE Virtual Subnet ID
  packet-type              Packet type
  src-ipv4                 Source IPv4 Address
  src-ipv6                 Source IPv6 Address
  src-l4-port              L4 Source Port
  src-mac                  MAC address of the source
  vlan                     Identifier for a Virtual LAN
  >                        Redirect output to URL
  >>                       Append redirected output to URL
  |                        Command output pipe filters
  <cr>                    


The command you mentioned doesn't exist on my platform:

#show load-balance destination ?% Unrecognized command


#show load-balance ?
  ecmp          Show ECMP parameters
  port-channel  Show port-channel parameters
  profile       Show load-balance profile



The version on my platform takes the same input as yours (more or less) but as 
I wrote, I've found it be mostly useless, because it expects a double VLAN 
tagged frame for example, it's not possible to specify untagged... /me shrugs

Cheers,
James.
-----BEGIN PGP SIGNATURE-----
Version: ProtonMail
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=p5wp
-----END PGP SIGNATURE-----

Attachment: publickey - lists+nanog@bensley.me - 0x3E936359.asc.sig
Description: PGP signature

_______________________________________________
NANOG mailing list 
https://lists.nanog.org/archives/list/nanog@lists.nanog.org/message/VZY7GFKJZGEM3FK76YGTS4IWF5BS3DT4/

Reply via email to