Hi,

Yes, we have spent some time collecting and building GIS analysis tools for 
various infrastructures, including fiber.  There are folks that sell or did 
sell GIS fiber data.  There are pros and cons for each, and nothing is 
complete.  That said a few places you might want to check out:

Geo-tel - has metro fiber for several cities.  Drawback is you cannot do 
routing analysis beacuse a large unumber of the conduits to do not connect to 
form cohesive paths.  

Platts - used to have a product call Telcomap that had longhaul and metro 
fiber.  The product was incomplete and discontinued, but there is data if you 
can get a hold of it.

Universal Access - also has GIS data but it is rather limited from what I've 
heard, have not actually worked with this set.  

Depending on what you want to do with the data, some of these might work for 
you.  Despite the media's best attemts, our work at GMU was not classified ** 
shameless plug ** the dissertation will be coming out as a book this summer.  
We have progressed quite a bit with the work in the intervening years, and have 
some interesting tools for quantifying the diversity between different sets of 
providers to optimize resiliency of networks, fail-sims, ROI models for 
different multi provider configurations.  Although I think the most interesting 
application of late is mapping IP traffic to its physical fiber routes.  Still 
in the prototype phase, but should be a good tool for finding points where a 
large number of logically diverse paths are in the same ditch.

best,

sean

----- Original Message -----
From: Aaron Glenn <[EMAIL PROTECTED]>
Date: Tuesday, July 5, 2005 6:41 pm
Subject: Re: source for GIS-correlated fiber conduit data

> 
> On 7/5/05, Gregory Hicks <[EMAIL PROTECTED]> wrote:
> > Someone did but it was not limited to fiber but included 
> utilities...> 
> > And did get slapped down for putting together publicly available 
> info> into a usable form...
> 
> Where are these publicly available records that Sean Gorman and
> TeleGeography are using to develop these maps? I've tried in 
> ernest to
> find even a starting point to no avail.
> 
> aaron.glenn
> 

Reply via email to