On 18-sep-2007, at 15:54, <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> wrote:
There are a couple of gaps. I can find no info on how to set up 6to4
relay services on Juniper routers. Does JUNOS support this at all? If
you know, go to the above page, click on Juniper, and tell us what
needs
to be done.
When I wrote my book, I mostly looked at Cisco for this, and apart
from Cisco to FreeBSD and Linux. The logic is that on a Cisco, you
can build a good tunnel box (6to4 or manual tunnels) on a C7200 or
some other box that has a decent CPU that can do the tunneling in
software. Quite possibly a Juniper can do the same with hardware
support (although I don't know that and it's also very possible that
they can't do it in hardware or with decent speed in software) but
there are no cheap(er) Juniper boxes that are suitable for deployment
as a 5 - 200 Mbps tunnel box, in my opinion.
