Yes. On Wed, Apr 8, 2009 at 9:03 PM, Amolak <[email protected]> wrote:
> Hi All, > > Is it possible to create L2 Etherchannel at one end and L3 etherchannel at > another end? > > For Example: > > SW-1 > ==== > > interface GigabitEthernet1/1 > channel-group 1 mode desirable > channel-protocol pagp > ! > interface GigabitEthernet1/2 > channel-group 1 mode desirable > channel-protocol pagp > ! > interface Port-channel 1 > no ip address > switchport > switchport access vlan 10 > switchport mode access > ! > int vlan10 > ip address 1.1.1.1 255.255.255.252 > ! > ------------------------------------ > > SW-2 > ==== > > interface Port-channel 2 > ip address 1.1.1.2 255.255.255.252 > ! > interface GigabitEthernet1/1 > no ip address > channel-group 2 mode desirable > channel-protocol pagp > ! > interface GigabitEthernet1/2 > no ip address > channel-group 2 mode desirable > channel-protocol pagp > ! > > I don't have a lab to test it, can somebody confirm if the connectivity > will > work between these devices as per this setup. > > Thanks, > Amolak >
