Also this 192.168.1.0/24 needs to have access to my other prefixes. It only needs to NAT'd when it needs to connect to that specific network.
From: Andrey Khomyakov [mailto:[email protected]] Sent: Friday, June 18, 2010 3:25 PM To: Mike Ruiz Cc: [email protected] Subject: Re: <NAT translation from a sourced network to a destination network> Do you mean you want certain addresses on /24 to NAT out to /27, but not all of them? Sounds like and ACL will do: http://articles.techrepublic.com.com/5100-10878_11-1039094.html -ak On Fri, Jun 18, 2010 at 4:13 PM, Mike Ruiz <[email protected]> wrote: Ok here we go. I know the subject is a little ambiguous, please allow to explain. I have a network of 192.168.1.0/24 and I need it to reach a network 10.0.1.0/27 only when it needs to be accessed by specific machines that reside on the 192.168.1.0/24 network. 192.168.1.10 à NAT à10.0.1.10 à route that packet to 10.0.1.1. I only want specific host to route to that specific /27 network . Any help would be appreciated. So far what I have gathered is only for VPN connections but I do not want to build a VPN. Thank you again in advance. Michael Ruiz Network Engineer "If you tell people where to go, but not how to get there, you'll be amazed at the results." -- General George S. Patton Jr. -- Andrey Khomyakov [[email protected]]
