These folks make a tester that loads up BGP very nicely. http://www.spirent.com/
http://www.spirent.com/Solutions-Directory/Smartbits.aspx Chris On Mon, Jun 28, 2010 at 8:52 AM, Tom Pipes <[email protected]> wrote: > > > Hello Giuliano, > > > > Along with the recommendation of dynamips, I would suggest downloading > gns3, which ties into dynamips. You can run the same version of IOS that > you are working with in production, and there are versions for Windows/*nix. > > > > http://www.gns3.net/ > > > > It acts more like an emulators at first glance, and does not seem to have > the same limitations as some of the other simulators out there. Just make > sure you have the hardware to support it. > > > > Thanks, > > > > --- > Tom Pipes > T6 Broadband/ > Essex Telcom Inc > [email protected] > > > ----- Original Message ----- > From: "Bill Fehring" <[email protected]> > To: [email protected] > Cc: "North American Network Operators Group" <[email protected]> > Sent: Sunday, June 27, 2010 11:37:17 PM > Subject: Re: BGP Tool for Simulation > > Oi Giulianao, > > I've used this in the past to dump a lot of routes into test networks: > > http://code.google.com/p/bgpsimple/ > > Tutorial: > http://evilrouters.net/2009/08/21/getting-bgp-routes-into-dynamips-with-video/ > > There's a similar project written in python, but I can't find it right now. > > HTH, > > -Bill Fehring > > On Sun, Jun 27, 2010 at 18:32, GIULIANOCM (UOL) <[email protected]> > wrote: > > People, > > > > I am looking for a tool (free or not) to simulate BGP full internet route > > table peering and injection using real CISCO and JUNIPER routers. > > > > We have found some power tools like Spirent or Agilent but they are a too > > expensive to acquire for now. > > > > The main idea is to have a software tool for unix or linux system, that > > supports to simulate a cloud a carrier or an ISP, to work with real > routers, > > establishing connection using BGP protocol and injecting on this real > > routers the full internet routing table - ipv4 or ipv6. > > > > Do you know some collection of tools (software tools) that we can use to > do > > this kind of work ? > > > > It is possible to collect full internet routing table and inject it to a > > real router using a software for simulate real conditions ? > > > > Besides, the tool will need some additional features in simulation like > the > > set of communities, local preference, med and other BGP attributes. > > > > What do you recommend for this tasks ? > > > > Thanks a lot, > > > > Giuliano > > > > > >
